Catalogs >
Sanborn Technologies >
LiquaPac® Centrifugal Separators and Clarifiers

LiquaPac® Centrifugal Separators and Clarifiers
4Pages

Catalog excerpts

LiquaPac® Centrifugal Separators and Clarifiers

Sanborn LiquaPac® Clarification Systems Designed to meet a wide range of applications and operational requirements for the metal cutting and finishing industry. Sanborn Technologies supplies LiquaPac Centrifuges in a variety of sizes and configurations. Tank-Mounted LiquaPac Centrifuge High-efficiency centrifugal separator with high solids-holding capacity The TMC is designed for retrofit or OEM applications where the machine tool includes its own holding tank and pumps. This basic centrifuge provides high-efficiency separation with minimal maintenance due to its design. Like all LiquaPac...

Open the catalog to page 2

LiquaPac® Centrifugal Separators and Clarifiers - 3

Reduced cleanout frequency due to its 1.4 gallon holding capacity. Removes both ferrous and non-ferrous contaminants. Accommodates water-based or oil-based fluids. Feed cone rapidly accelerates fluid to bowl rotation speed, improving separation efficiency. Does not use disposable media such as paper or cartridges. May be started and stopped at any time without the need to clean out the bowl. Self-draining feature automatically removes standing fluid from the centrifuge bowl. Sealed rotating assembly virtually eliminates premature bearing failure. Cover interlock keeps operators safe during...

Open the catalog to page 3

LiquaPac® Centrifugal Separators and Clarifiers - 4

GENERAL SPECIFICATIONS Model Maximum Liquid Processing Rate (gpm) Maximum Tank Solids/Sludge CapacityCapacity Dirty (Gallons) (Gallons) Tank CapacityClean (Gallons) Feed Pump Supply Length Flow Rate Pump Flow (Inches) (gpm) Rate (gpm) Width (Inches) Height Minimum Discharge (Inches) Inlet Height Height (Inches) (Inches) All systems are shipped factory-assembled; all controls are optional. RCS models require only two piping connections for installation. All models accommodate viscosities from 30-500 SSU. Contaminant density must be greater than liquid density. Power requirements: 230/460...

Open the catalog to page 4