Catalogs >
Sanborn Technologies >
CHIP PAC™ Batch-Type Centrifugal Chip Wringers

CHIP PAC™ Batch-Type Centrifugal Chip Wringers
2Pages

Catalog excerpts

CHIP PAC™ Batch-Type Centrifugal Chip Wringers - 1

CHIP PAC™ Batch-Type Centrifugal Chip Wringers CW 7 « CW 75 + CW 150 - CW 250 Disposing of metal chips contaminated with coolants or ails is becoming increasingly difficult — and expensive. SANBORN CHIP PAC Centrifugal Chip Wringers eliminate these costs and liabilities by remov- ing residual fluid from chips produced by grinders, lathes, and other metalworking machines. SANBORN CHIP PAC Chip Wringers use centrifugal force generated by a rapidly spinning basket to effectively remove the liquid coating from chips and turnings. The result is clean, dry scrap metal of saleable quality, and fully reusable oils and coolants. In fact, costs for new oil can be reduced by up to 90 percent. Each SANBORN CHIP PAC unit is con- structed of heavy-duty, arc-welded steel for reliable performance and minimal maintenance. One of our four models is certain to accommodate your operational requirements. * CW 7: Designed for short runs, laboratory use, or small plated parts. Tabletop unit has a seven-pound capacity and requires only one square foot of space. * CW 75: Offers a 75-pound capacity for moderate production. * CW 150: A 150-pound capacity makes this model ideal for medium- to high-volume manufacturing * CW 250: SANBORN’s high-capacity Chip Wringer _ accommodates as much as 250 pounds to meet the needs of high-volume operati

Open the catalog to page 1

CHIP PAC™ Batch-Type Centrifugal Chip Wringers - 2

General Specifications Machel Overall Height Work Height Fast, Easy Operation CW 5 Flogr Space Required | Ga" x 14" Operating Speed Motor Size Basket Size sealed ball tapered roller tapered roller direct coupled | 2 V-belts 1. The operator depresses the foot brake to stop the wringer, and unlocks the cover. The : cover opens in either direction to maxi mize Inacding clearance. The operator removes and unloads the bas ket, then places a loaded basket in the spinner housing. 2. The operator closes the cover, (Note: The cover must be closed completely or the unit will not operate.) «3 Ph* 60...

Open the catalog to page 2