Data Sheet Rotary Plug Valve Type 82.7 Double eccentric control valve for process engineering and industrial applications Valve Size Nominal Pressure Temperature Range of Medium Valve Body Material  Cast carbon steel  Cast stainless steel  Low temperature carbon steel  Special alloys (Duplex, Hastelloy etc.)  Other special materials on request Seat version  Metal sealing, armored or unarmored  Soft sealing  Standard seat factors 1 / 0.6 / 0.4 / 0.25 Standard version For temperatures from –100 to +400 °C (–148 to +752 °F) Fig. 1: VETEC Rotary Plug Valve – Type 82.7 (example with mounted Type R Actuator) DN 25 to 250, PN10/ PN16/ PN25/ PN40, faceto-face dimensions acc. to EN 558, Table 16, Series 36 NPS 1 to 10, CL 150 / CL 300, face-to-face dimensions acc. to EN 558, Table 16, Series 36 TA-Luft packing / double packing Special materials for body and trim Noise reduction devices for gaseous mediums Anti-cavitations devices for liquids Flange version with tongue/groove or male-face/female-face according to EN 1092-1 RF and RTJ according to ANSI B16.5 Versions for higher and lower temperatures on request The valves can be equipped with different accessories, such as positioners, solenoid valves and other accessories according to VDI/VDE 3845. Fig. 2: VETEC Rotary Plug Valve Assembl

Principle of operation The shaft/plug arrangement is eccentric (Figs. 3 and 4). The double-eccentric design of the rotary plug valve is achieved in combination with the offset of the plug's pivot. When turning the plug shaft from closed position in opening direction, the double-eccentric design allows the plug to lift off the seat smoothly without initial breakaway torque. The valve is not opened suddenly and shows a stable control response even with small opening angles. The rotary plug valve can be used for both directions of flow. Fig. 3: Plug Movement with Double-Eccentric Arrangement For...

Table 1: Technical data Valve Type Valve size Style Flange pressure rating Max. operating pressure Overall length Flange bore/form Flow direction Characteristic Rangeability Temperature range of medium Opening angle Equal percentage / linear / ON-OFF

Order Specification

VETEC Ventiltechnik GmbH Siemensstraße 12 · 67346 Speyer Telefon: 06232 6412-0 · Fax: 06232 42479 · E-mail: [email protected] · Internet: www.vetec.de Sitz der Gesellschaft: 67346 Speyer · Registergericht: Amtsgericht Ludwigshafen HRB 51677 · USt-IdNr.: DE149689913 · Geschäftsführer: Uwe Vogel