1. Catalogs
  2. SAMOA Industrial, S.A.
  3. PRINTING INK SUPPLY SYSTEMS

PRINTING INK SUPPLY SYSTEMS

PRINTING INK SUPPLY SYSTEMS
1 / 16 PagesView full catalog

PRINTING INK SUPPLY SYSTEMS

Product catalog summary
Overview
SAMOA is a prominent European manufacturer specializing in fluid handling technology, offering products for fluid transfer, dispensing, dosing, recovery, and inventory control. Their product range includes volume flow meters, hose reels, air-operated piston pumps, and Directflo® diaphragm pumps.
Product Development
SAMOA focuses on continuous research and development to address evolving customer needs, enhancing existing products and creating new ones.
Manufacturing
Located in Gijón, Spain, SAMOA's headquarters and manufacturing facilities are equipped with advanced technology and comply with ISO 9001, ISO 14001, and OHSAS 18001 standards, ensuring quality, environmental sustainability, and workplace safety.
Distribution
SAMOA products are distributed worldwide through a network of knowledgeable distributors offering sales, consulting, and after-sales services.
Product Specifications and Features
  • Ink System Pumps: Designed for high viscosity inks, these pumps feature high efficiency and heavy-duty construction, suitable for centralized ink delivery systems and individual press feeding.
  • Air Motors: Utilizing reciprocating air motors with a mechanically linked signal valve, these pumps ensure efficient operation without stalling and require minimal maintenance.
  • Materials and Design: Constructed from high-quality materials like carbon steel and cast iron, the designs minimize wear and maximize seal life.
  • Noise and Maintenance: The pumps are designed to reduce noise and are easy to maintain due to their divorced design, separating the air motor from the pump.
Technical Data and Performance
The document details technical specifications for pump models such as the Pumpmaster 35, 45, 60, 80, and 100 series, including air motor diameter, stroke, air pressure range, inlet and exhaust ports, noise level, and design type. Performance curves show the relationship between air consumption, fluid pressure, and flow rates under various conditions.
Recommendations
SAMOA advises operating pumps at reduced cycles per minute to minimize wear and maintenance. Selecting the appropriate pump model based on specific application requirements is emphasized.
Technical Specifications
Specifications for pump models, including the PM100 series with different pump ratios (16:1 and 22:1), cover fluid inlet and outlet types, displacement per cycle, flow rates, dimensions, and weight. These pumps are designed for use with 440 lb (200 kg) drums or totes using a Floor Stand Suction Kit.
Inductor System Features
The inductor system includes guide rods, a drum holder or clamp, and a control box with features like on/off pump control, ram up/down control, independent air pressure regulators, and an empty drum shut-off safety feature.
Ink Piston Pump Packages
Various pump packages are available for different drum sizes (110 lb and 440 lb), with part numbers and included pumps listed, highlighting the ease of change-over of empty containers using a hoist system.
Directflo® Technology
The Directflo® pump features an innovative design where fluid flows through the inside of the pump, and compressed air acts on the outside, offering superior performance, reduced air consumption, and simple maintenance.
Diaphragm Pumps for Printing Industry
Recommended for the printing industry, these diaphragm pumps are suitable for low viscosity solvent and water-based inks, with a range of configurations to ensure product compatibility.
Contact Information
Contact details are provided for SAMOA Corporation in North America, Hydrair Ltd. in the UK, and SAMOA Industrial in Europe and the rest of the world.
See more

Catalog excerpts

PRINTING INK SUPPLY SYSTEMS-1

LEADING THROUGH INNOVATION prINTING INK SUPPLY PUMPS PUMPS • PUMPING STATIONS • ACCESSORIE

 Open the catalog to page 1
PRINTING INK SUPPLY SYSTEMS-3

Headquarters Offices and Technical Center in Gijón (Spain) Samoa Quality and Leadership FLUID HANDLING TECHNOLOGY SAMOA, a privately owned company, is a leading European manufacturer of equipment for fluid transfer, dispensing, dosing, recovery and inventory control. SAMOA designs and manufactures volume flow meters, hose reels, air operated piston pumps and air operated diaphragm pumps, including innovative Directflo® diaphragm pumps. Research & Development and Manufacturing facility in Gijón (Spain) PRODUCT DEVELOPMENT Product research and development is a fundamental part of SAMOA’s philosophy....

 Open the catalog to page 3
PRINTING INK SUPPLY SYSTEMS-4

Ink Distribution Systems General installation layout SAMOA-Hydrair pumps can be used in a wide range of systems feeding ink through high pressure pipe work to press. • Centralized ink delivery systems feeding multipress installations. • Individual presses can be fed from dedicated stand-alone-pump-system. • Simple systems, supplying ink from large drums to dispensing valves for replenishing ink cans. Suction hose with quick release coupling Isolation valves 440 lb Drum Supply Ink system pumps mounted onto Power Pump Hoists Compressed air supply to pumps and rams Isolation valves Quick release...

 Open the catalog to page 4
PRINTING INK SUPPLY SYSTEMS-5

Ink Piston Pumps. The heart of an ink system Leading technology and innovation • Designed to pump high viscosity inks at high flow rates. • A full range of Heavy-Duty, high efficiency, air powered, double acting, positive displacement piston pumps offer solutions to move any ink volume fast. Hoist eye bolt Air exhaust & muffler Air entrance Signal valve Heavy-Duty equipment MOVE EFFICIENT Reciprocating air motors actuated by a mechanically linked signal valve, mounted on a trip rod (piston rod), which senses when the drive piston has reached an end of stroke. Once this occurs, the signal valve...

 Open the catalog to page 5
PRINTING INK SUPPLY SYSTEMS-6

PumpMaster 35 Bantam PM35 Series With the need for the small printer to turn away from expensive and inconvenient 4.4 lb (2 kg) can, this pump, when mounted on the 44 lb (20 kg) mobile single post Power Ram, offers a low cost solution to the printer who does not require a central ink distribution system. The Bantam PM35 pump is ideal for local transfer straight to the supply line. Technical data Air motor effective diameter Integrated air exhaust muffler Air motor & pump design Divorced type Pump Ratio Fluid inlet type Ball check Fluid inlet thread Fluid outlet thread Approx. cycles per gallon...

 Open the catalog to page 6
PRINTING INK SUPPLY SYSTEMS-7

PumpMaster 45 Cruiser PM45 Series The Bantam PM45 Series is a general-purpose range of 4 1/2" diameter air motor pumps able to transfer most fluid and semi-fluid materials. These pumps are light enough to be portable and can be used with a mobile single post Power Ram but heavy enough to handle day-in and day-out pumping demands. Technical data Air motor effective diameter Exhaust muffler included (3/4" (F) threaded port for remote exhaust) Air motor & pump design Divorced type Pump Ratio Fluid inlet type Ball check Ball check Fluid inlet thread Fluid outlet thread Approx. cycles per gallon Standard...

 Open the catalog to page 7
PRINTING INK SUPPLY SYSTEMS-8

PumpMaster 60 Dreadnought PM60 Series The Dreadnought PM60 range features 6" diameter air-motor pumps designed to transfer offset inks. Ideal for distribution and mixing systems particularly when ink is pumped from standard drums or stationary containers. Technical data Air motor effective diameter Exhaust muffler included (3/4" (F) threaded port for remote exhaust) Air motor & pump design Divorced type Pump Ratio Fluid inlet type Chop-check valve with priming disc Ball check Fluid inlet thread Fluid outlet thread Approx. cycles per gallon Standard flow rate* Pump Hoist with 440 lb (200 kg) drums...

 Open the catalog to page 8
PRINTING INK SUPPLY SYSTEMS-9

PumpMaster 80 Warrior PM80 Series The Warrior PM80 range features 8" diameter air motor pump and it is the ideal workhorse even for long pipelines. Built to last, Warrior PM80 series pumps are also double acting, delivering material on both up and down strokes, while the divorced design prevents contamination of the air motor seals. Technical data Air motor effective diameter Exhaust muffler included (3/4" (F) threaded port for remote exhaust) Air motor & pump design Divorced type Pump Ratio Fluid inlet type Chop-check valve with priming disc Fluid inlet thread Fluid outlet thread Aprox. cycles...

 Open the catalog to page 9
PRINTING INK SUPPLY SYSTEMS-10

PumpMaster 100 Dominator PM100 Series The Dominator PM100 range features a 10" air-motor. This reliable and powerful pump is ideal for centralized, static bulk tank, ink pump stations that supply multiple, high speed, newspaper and commercial press installations. Technical data Air motor effective diameter Exhaust muffler included (3/4" (F) threaded port for remote exhaust) Air motor & pump design Divorced type Pump Ratio Fluid inlet type Chop-check valve with priming disc Chop-check valve with priming disc Fluid inlet Fluid outlet thread Aprox. cycles per gallon Standard flow rate* Power Ram...

 Open the catalog to page 10
PRINTING INK SUPPLY SYSTEMS-11

Ink Piston Pump Packages Pump Systems with Power Ram Dreadnought PM60, Warrior PM80 and Dominator PM100 series ink pumps mounted onto an air operated inductor plate for use with high viscosity fluids directly from 440 lb (200 kg) drum. When the inductor plate is attached to the lower end of the pump tube, the weight of the pump and plate and the downward pressure from cylinders on the plate forces material priming. The inductor plate also serves as protection against contaminants and eliminates material waste. Technical specifications 3” (80 mm) 52” (1,320 mm) Available lift Operating compressed...

 Open the catalog to page 11
PRINTING INK SUPPLY SYSTEMS-12

Ink Piston Pump Packages Floor Stand Suction Kits Pump Systems with Hoist Pump Hoist ease change-over of empty containers An internal cylinder lifts the pump from the container. The pump is fixed to the single lip follower plate and the weight of the air motor, pump, and mounting bracket maintains pump prime. The unit is very robust and easy to use. It includes a pneumatic valve which controls the pump lift up and down movement. Technical specifications 110 lb (50 kg) drums Hoist cylinder diameter Overall height lowered Overall height raised Available lift Operating compressed air pressure range...

 Open the catalog to page 12
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.