PNEUMATIC PISTON TAIL GREASE PUMP, PUMPMASTER 80, PM80 - 50:1 (KIT COMPONENT)

Product catalog summary

Overview: The document provides technical specifications and details for the PNEUMATIC PISTON TAIL GREASE PUMP, specifically the PUMPMASTER 80, PM80 - 50:1 model. This pump is part of a kit and is designed for industrial use.

Technical Specifications:

Air Consumption: 1500 NL/min (53 scfm)
Air Inlet: 3/4" NPT (F)
Air Motor: Effective diameter of 150 mm (6 "), stroke of 200 mm (6 ")
Operating Air Pressure Range: 3 - 7 bar (40 - 100 psi)
Cycles per Litre: Approximately 7 cycles
Delivery Rate: 2 kg/min (4.5 lb/min)
Delivery per Cycle: 0.144 kg (0.317 lb)
Fluid Inlet: 2" BSP (F), Chop-check type
Fluid Outlet: 1" NPT (F)
Fluids Handled: Tail grease
Maximum Free Flow Delivery: 14.3 lb/min, 6.5 kg/min
Maximum Outlet Pressure: 350 bar (5075 psi)
Noise Level: 80 dB
Pressure Ratio: 50:1
Pump Mounting: 185 kg (400 lb) drums
Total Height: 1221 mm (48.2 ")
Tube Height: 261 mm (10.2 ")
Weight: 29 kg (64.04 lb)
Wetted Materials: Copper, PTFE, Carbon steel, Polyurethane, Cast iron

Documentation: An instructions manual is available under the document number 854816.pdf.

Model Comparison:

544015: Pump mounting for 185 kg drums, tube height of 261 mm, total height of 1221 mm.
352220: Universal stub pump, tube height of 270 mm, total height of 560 mm.
532330: Bulk tote, tube height of 164 mm, total height of 684 mm.
740410: Universal stub pump, tube height of 450 mm, total height of 660 mm.

Contact Information: SAMOA Industrial, S.A., located in Gijón, Spain. Phone: (+34) 985 381 488, Fax: (+34) 985 384 163, Email: [email protected], Website: www.samoaindustrial.com

Catalog excerpts

PNEUMATIC PISTON TAIL GREASE PUMP, PUMPMASTER 80, PM80 - 50:1 (KIT COMPONENT)-1

PNEUMATIC PISTON TAIL GREASE PUMP, PUMPMASTER 80, PM80 - 50:1 (KIT COMPONENT) PM80 series air operated piston pumps. This is a component for a kit. PUMPMASTER 80, 50:1 ratio pneumatic piston tail grease pump. DATOS TÉCNICOS Air motor effective diameter Air pressure operating range Cycles per litre (aprox.) Fluid inlet Fluid inlet type Fluid outlet Tail grease Maximum free flow delivery (SI) 14.3 lb/min, 6.5 kg/min, 6.5 kg/min Maximum outlet pressure Noise level Pressure ratio Pump mounting Total height Tube height Wetted materials Copper, PTFE, Carbon steel, Polyurethane, Cast iron

Open the catalog to page 1

PNEUMATIC PISTON TAIL GREASE PUMP, PUMPMASTER 80, PM80 - 50:1 (KIT COMPONENT)-2

Pump mounting Pump mounting Universal stub pump Tube height Tube height Total height Total height Pump mounting Pump mounting Bulk tote Tube height Tube height Total height Total height Pump mounting Pump mounting Universal stub pump Tube height Tube height Total height Total height SAMOA Industrial, S.A. Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 Gijón - España Tel.: (+34) 985 381 488 - Fax: (+34) 985 384 163 [email protected] www.samoaindustrial.c

Open the catalog to page 2