Ocean SK datasheet
1 / 7Pages

Ocean SK Data Sheet

Ocean SK Cutting table While designing our cutting table we have put a lot of effort to make a very precise and stiff framework, which would be also very aesthetic. The special girder nodes give the construction light weight and high stiffness. The table top has a solid surface and a strong PVC tape, which protects the edges of the table. Modular design allows any length of the table and the possibility to install the optional equipment. Installation of the table is very simple. The tables are delivered pre-assembled, which facilitates quick assembly. Four table widths are available as...

BASIC FEATURES CUTTING TABLE Width powder coated steel profiles ADDITIONAL EQUIPMENT CUTTING TABLE Bottom shelves END CUTTERS Manual end cutter DYDB-1 cutting height of one layer up to 5 mm cutting height of one layer up to 5 mm cutting height of one layer up to 25 mm UNWINDERS Unwinder with one bar load capacity up to 50 kg, roll diameter up to 80 cm, mounted on a tabletop Unwinder with two bars load capacity up to 50 kg, roll diameter up to 80 cm, mounted on a tabletop, second bar to guide the material Upper unwinder load capacity up to 40 kg, roll diameter up to 30 cm, mounted to the...

CUTTING TABLE Special girder connectors provide the light The frame is delivered with pre-assembled spans, construction and extra stiffness which simply need to be connected using strips Adjustable legs allow you to adjust the table height. Optionally, the table can be equipped with castors with brake. Thanks to its modular structure, the table can be easily extended with additional segments.

EXAMPLE CONFIGURATIONS SK-180 table with DYDB-1 manual end cutter, SK-180 table with DYDB-2 automatic cutter, unwinder with one bar and manual holding bar unwinder with two bars and a manual holding bar Table with the DYDB-2B automatic cutter, upper unwinder and a pneumatic holding bar SK-180 table on castors with a lower shelf

TECHNICAL DRAWINGS - EXAMPLES OCEAN SK-180 – length 460 cm

SAMEX Professional Cutting Equipment 93-160 Łódź, ul. Kilińskiego 300 Poland +48 42 643 05 30 info@samex.com.pl www.samex.com.pl www.youtube.com/c/SAMEXPolan