SEWER CLEANING NOZZLESS Januari 2010

Salotech International is specialized in design and manufacturing of high pressure nozzles and accessories up to 3000 bar. Innovation, safety and quality are characteristics for Salotech International. Our successful “One stop shopping” policy and a growing interest from the market, causes Salotech International to enlarge her existing wide range of leading high pressure nozzles with a complete line of efficient and reliable sewer cleaning nozzles. We put together a clearly structured catalog in which you will find an innovative program of sewer cleaning nozzles for the right application. If...

Technical information Introduction Product awareness Warranty Before using any nozzle or tool, read carefully this catalog and product instructions, in order to be aware of nozzle performance. Salotech International B.V. warrants the products for its manufacture, free of material and workmanship defects for one year from the date of shipment, provided that they have been properly maintained and operated. Optimize nozzle performance! When ordering nozzles, let us know pump parameters (flow and pressure) and hose information (size, type and length): orifice size is calculated on the base of these...

Index Nozzle selection guide Pipe Ø (mm and inch) 50 2'' 100 4'' 200 8'' 300 12'' 400 16'' 500 20'' 600 24'' 800 32'' 1000 40'' 2000 80'' NOZZLE SERIES: Standard cleaning nozzles SILE CELLINA page 7 LIVENZA VORTEX - MEDUNA ARZINO FARA - DURANNO High efficiency cleaning nozzles CANIN page 9 RONDÒ ISONZO TREMOL RAUT WARTHOG NATISONE Heavy torpedo nozzles for sand and mud PIAVE MEGA page 13 POWERJET VENTURI CARNIA - FRIULI Root cutters PASSACURVE page 16 KOMBI Milling and vibrating nozzles page 18 AVIAN JULIA BARCIS CIMOLAIS WAMAX RDS-V RUMAX Accessories page 23 Hose protection devices, manhole...

Technical Information Nozzle selection guide Jet angle Nozzle performance depends on angle and quality of water jets as well. Nozzle series Rear jet angle Performance Canin, Fara, Duranno, Arzino, Livenza, Meduna < 30° High thrust, Soft impact against pipe wall Isonzo, Rondo, Cellina, Tremol > 30° Low thrust Strong impact against pipe wall Effective cleaning action Raut, Warthog Front jets Low thrust, High front impact Working pressure For milling, propeller, chain and vibrating nozzles (Avian, Julia, Barcis, Cimolais, Wamax, RDS-V, Rumax) working pressure must not exceed 150 bar. Higher working...

Standard nozzles Maximum pressure 250 bar Small nozzles (conical or round head, 25° and 35° jet angle), with or without front jets Applications: general cleaning, blockage penetrating, drains. Part number Item Inlet port Rear jets angle Rear jets (nr) Size DNxL (mm) Weight Flow (gr) (lt/min) Pipe Ø (mm) 5500.07A Sile CH with FJ 1/8'' F 35° 1 Ø 15x15 8 20-60 5500.07 Sile CH without FJ 1/8'' F 35° n/a Ø 15x15 8 20-60 20-60 5500.07F2 Sile CH with 2 FJ 1/8'' F 25° 2 Ø 15x15 8 20-60 20-60 5500.07TR Sile CH with 4 FJ 1/8'' F 25° 4 Ø 15x15 8 20-60 20-60 5500.17A Sile RH with FJ 1/8'' F 35° 1 Ø 15x15...

Standard nozzles VORTEX - MEDUNA - LIVENZA Maximum pressure 300 bar High thrust nozzles with 1/2'' connection for small drains. Vortex: combined jet nozzles (15°/35°) Meduna: round head with male and female thread Livenza: conical head nozzles Applications: general cleaning, vertical columns, pipes with 90° bends Part number Item Inlet port Rear jets angle type Front jets type Size Weight DNxL (mm) (gr) Flow (lt/min) Pipe Ø (mm) 5528.50 Vortex 1/2'' F 15° / 35° drilled M6 Ø 37x37 175 80-170 50-200 3520.110 Meduna 1/2'' M 25° drilled M6 Ø 25x43 70 40-170 50-125 3520.210 Meduna 1/2'' F 25° drilled...

High efficiency cleaning nozzles FARA - DURANNO - CANIN Maximum pressure 250 bar Grenade nozzles for high thrust and effective cleaning jobs. Heat treated alloy steel for durability, yellow zinc plating for corrosion resistance. Replaceable ceramic inserts. A deviator set inside the nozzle maximizes flow efficiency reducing pressure drop. Applications: general cleaning, heavy debris removal (Fara and Duranno), sediment deposits, sand, silt and gravel, heavy sludge, long runs (Canin) Part number Item Inlet port Rear jets nr. and angle type 65540.60 Fara 1'' F 8 x 15° TE 1/4'' C TE 1/4'' Ø 87x142...

High efficiency cleaning nozzles1 RONDÒ Maximum pressure 300 bar Grenade nozzle with fan jet set at 45° for a 360° cleaning action. Applications: grease removal, pipe cleaning before CCTV inspection. Part number Inlet port Rear jets angle type Size DNxL (mm) Weight (kg) Flow (lt/min) Pipe Ø (mm) 3580.01 1/2'' F 45° + 18° fan + 3xM6 Ø 39x68 0,5 95-150 50-200 3580.05 3/4'' F 45° + 18° fan + 3xM8 Ø 53x78 0,9 115-190 70-350 3580.10 1'' F 45° + 18° fan + 3xM8 Ø 59x90 1,4 170-265 75-450 3580.15 1'' F 45° + 18° fan + 3xM12 Ø 89x125 4,3 230-340 130-550 3580.20 1'' 1/4 F 45° + 18° fan + 3xM12 Ø 89x125...

High efficiency cleaning nozzles TREMOL Maximum pressure 250 bar Rotating nozzle with 90° radial jets. Spinning action provides 360° pipe cleaning. Applications: grease, soap, limestone, vertical columns (1/2" nozzle). Part number Inlet port Rear jets angle type Rotation jets angle type Size DNxL (mm) Weight (kg) Flow (lt/min) Pipe Ø (mm) 75510.19R 1/8" F 2 x 20° drilled 2 x 90° drilled Ø 14x39 30 gr 25-50 25-80 75510.23R 1/4'' F 3 x 25° drilled 2 x 90° drilled Ø 22x46 0,1 25-80 25-60 75510.14R 1/2'' F 6 x 25° M4 4 x 90° M4 Ø 35x60 0,3 75-170 45-150 75510.35R 3/4'' F 4 x 25° M6 C 4 x 90° M6 C...

High efficiency cleaning nozzles WARTHOG Controlled rotation cleans better: jets clean pipes more efficiently at a controlled and more productive speed Fewer jets deliver more power: you get more power per jet resulting in superior root cutting and unmatched wall cleaning. Easy field maintenance: customers spend ad average of only 15 minutes per year replacing the seal. Replaceable nozzle tips: hard hitting attack tip nozzles are field replaceable and keep the tool performing at its best. Optional descaling heads, with two additional ports at 105°, maximize wall cleaning power. The Warthog family...