Catalogs >
SALICRU >
CONTROLVIT

CONTROLVIT
32Pages

Catalog excerpts

CONTROLVIT Variable frequency drives from 0.2 kW to 500 kW

Variable frequency drives from 0.2 kW to 500 kW Energy efficient It is increasingly becoming necessary for the speed of motors in industrial facilities and processes to be regulated in order for them to adapt to changing load needs and for their energy consumption to be reduced. The variable frequency drives in SALICRU’s CONTROLVIT range enable simple and efficient control of any application driven by asynchronous motors from 0.2 kW to 500 kW. In the face of growing demand for energy in industrial facilities and processes, SALICRU’s CONTROLVIT range is an effective solution to enhancing...

Open the catalog to page 2

THERMAL OPTIMIZATION Independent ventilation funnel, isolated from electronics. Thermal disipation optimization through CAE simulation. Easy fan disassembly. CONTROL PANEL ADAPTABLE ASSEMBLY Removable control box and connecting port for remote operation. Diverse assembly options (wall mounting, perimetral flange, separated control panel, ...). Easy settings transfer between units with the paramter copying console. Side-toside assembly for space reduction (CV30). Intuitive parametrization. Small dimensions. DIN rail clipping system. EASY INSTALLATION Several Input/Output connections. Strong...

Open the catalog to page 3

Ease of use Easy to select The drives in the CONTROLVIT range are manufactured with the most common features as standard, reducing the need to add additional hardware and simplifying device selection. Easy to configure Configuration is quick and easy because the device keypad is highly intuitive and the parameter structure follows a natural order by separating the related parameters into groups (inputs, outputs, communications, etc. )All drives in the CONTROLVIT range have the same parameter structure, so, if you know one, you know them all. The drives can be installed in different ways...

Open the catalog to page 4

High performance The compact size of the CONTROLVIT range enables space to be saved in electrical cabinets, reducing associated costs and improving the cost-efficiency ratio of the system. Dynamic and static motor auto-tuning The CV30 series up to 2.2 kW stands out for its extremely compact dimensions and side-by-side installation possibilities. The CV30 and CV50 series have a precise dynamic and static motor auto-tuning function, the latter of which is suitable for cases in which it is not possible to remove the load from the motor. Three control modes available The CONTROLVIT range...

Open the catalog to page 5

All inclusive Wide power and multi-application range The drives in the CONTROLVIT range can work with asynchronous motors from 0.2 kW to 500 kW, and, due to their features and diversity of functions, are valid for the vast majority of applications, both in facilities and industrial processes. Application to water pumps The whole range features sleep/wake mode for pump control, but the functions of the CV50 series are the most advanced, as it includes two sleep or wake parameter setting modes through sensor pressure % or frequency and it enables the creation of a multi-pump system with up to...

Open the catalog to page 6

Reliability and durability Mean time between failure The drives in the CONTROLVIT range have an MTBF of 11.8 years. This represents the predicted elapsed time between two random failures. The method for calculating MTBF is complex and also takes into account the electronic components that make up the drive. Wide range of voltages Advanced protections They feature advanced electro-thermal protections for the motor and against input and output phase failure. For example, the CV50 series has 34 different protections. Terminals The power and control terminals are robust, clear and easy to...

Open the catalog to page 7

Optionals parts Advanced LCD keypad The CV50 features an optional advanced LCD keypad that can replace the device’s standard LED keypad. It has 10 lines of information, and contains a brief explanation of each of the drives’ parameters and different options. EMC filters All drives in the CV50 series and those in the CV30 series with threephase power supply of 230 V ≥ 1.5 kW and 400 V ≥ 4 kW have a category C3 built-in EMC filter as per standard EN 61800-3. For the other drives, an optional category C3 EMC filter is available to connect in parallel to the input of the drive and located...

Open the catalog to page 8

Output chokes Braking resistors These decrease peaks of voltage generated by the drive’s IGBT switching and the capacitive effect of the cable, short-circuiting high frequencies in common mode. They also prevent the premature ageing of the motor’s windings and bearings. Braking resistors of ohmico and power ranges, adapted to every VFD. They are available encapsulated in an aluminum housing or mounted inside a metal box. Recommended for facilities in which the cable length between the drive and the motor is between 50 and 100 metres approximately. Side covers Suitable for harsh...

Open the catalog to page 9

Variable frequency drives from 0.2 kW to 2.2 kW CV10: Compact, flexible and easy-to-use single-phase input drives Salicru’s Controlvit CV10 variable frequency drive series offers the most competitive solution for a wide range of applications. With a single-phase input voltage, it is designed to operate with low-power motors and has very complete hardware that features, among other things, a removable keypad with built-in potentiometer, dynamic braking unit, RS-485 Modbus communication and natural cooling in equipment of up to 0.75 kW. Boasting an optimised and elegant design, it has...

Open the catalog to page 10

Performances ∙ V/f control. ∙ Built-in potentiometer. ∙ Remote control with removable keypad. ∙ Optional EMC filter with easy connection. ∙ Advanced PID process control. ∙ Automatic energy saving. ∙ Built-in dynamic braking unit. ∙ DC braking. ∙ Simple sleep/wake function for control of one pump. ∙ 16-speed multi-step control. ∙ RS485 Modbus RTU communication. ∙ Natural cooling (without fan) for power ratings 0.2 ÷ 0.75 kW. Fans with on/off control and easy replacement for 1.5 and 2.2 kW. ∙ Automatic torque boost. ∙ Possibility of increasing/decreasing operation speed with external push...

Open the catalog to page 11