Solar-powered pumping cabinets ACV30-PV: Complete solution for solar-powered pumping facilities The ACV30-PV cabinets offer a fully finished solution for solar-powered pumping facilities that use pumps of up to 5.5 kW. Depending on the model, they can be mounted indoors or outdoors, and offer the option of isolated systems (powered solely by solar panels), systems with automatic switchover to the power generator or mains, and systems with manual switchover. They incorporate the CV30-PV drive, which is specifically designed for solar-powered pumping, and depending on the model they also include the BOOST MOD-320-PV booster module, which significantly reduces the number of panels required. They are equipped with the necessary protection at the solar panel input (DC circuit breaker and over-voltage protector) and, where applicable, the AC input (circuit breaker and contactor). As the distance between the drive and the pump can be considerable, all models are fitted with an output ferrite in order to prevent potential pump breakdowns; moreover, for particularly long distances (usually over 100 metres), the option of cabinet-mounted sine-wave filters is available. To ensure full control of the system, the cabinets also include a water level sensor and digital clock/timer. This can be used to protect the pump against dry operation, and to set the system’s operating times. Without a doubt, it is a solution that offers installers tremendous convenience and reliability, owing to the fact that potential issues with mounting and configuration are reduced to a minimum. Applications: The main application of the ACV30-PV solar-powered pumping cabinets is agricultural irrigation, either via the accumulation of water in a tank or feeder pool for subsequent use or via direct irrigation from a well. Other applications include domestic consumption in isolated areas, livestock water supply, fish farming, municipal and forestry irrigation, and desert control.

Performances ∙ Simple to install and configure. ∙ Indoors or outdoors mounting. ∙ Isolated power supply or with automatic/manual switchover. ∙ Optional booster module. ∙ DC circuit breaker. ∙ AC circuit breaker for models with switchover to the generator or mains. ∙ DC over-voltage protector (Type II, 1,000 VDC). ∙ 24 VDC water level sensor + weights. ∙ Clock/timer for ON/OFF control. ∙ Control console and ON/OFF switch on the cabinet door (indoor mounting). ∙ Status indicator lights and ON/OFF switch on the cabinet door (outdoor mounting). ∙ Output ferrite. ∙ ATS automatic switchover module...

Range CODE PUMP VOLTAGE MAXIMUM PUMP POWER Automatic switchover to the generator Automatic switchover to the generator Automatic switchover to the generator Automatic switchover to the generator Automatic switchover to mains power Automatic switchover to mains power Automatic switchover to mains power Automatic switchover to mains power Manual switchover Manual switchover Manual switchover Manual switchover Automatic switchover to the generator Automatic switchover to the generator Automatic switchover to the generator Automatic switchover to the generator Automatic switchover to mains power...

REF. JJ110B01 CODE 401AB001316 ED. MAY 2022 - VARIABLE FREQUENCY DRIVES Technical specifications MODEL Recommended DC input Recommended MPPT voltage Maximum DC voltage DC protection MAINS INPUT Starting voltage DC circuit breaker and overvoltage protector (Type II, 1,000 VDC) Voltage Frequency AC protection Rated voltage Three-phase, 0 ÷ 100% of the input voltage. Admissible overloads AC circuit breaker and contactor (for models with automatic switchover to the mains) 150% for 1 min; 180% for 10 s; 200% for 1 s Maximum distance INPUT SIGNALS OUTPUT SIGNALS Analogue Digital Communication port...