CATALOGUE
260Pages

Water Solutions Worldwide

New features: practical guide Salher has been innovating since 1980 and at the dawn of 2018, the company will present its new catalogue full of new releases both in terms of manufacturing methods and range of products. Since then, a large number of equipment has been added, updated and revised. One of the fundamental innovations in 2017 was the new MA or Multi Angle production system, which gives Filament Winding's GFRP equipment significant technical improvements in strength and durability, as well as the security of traceability and quality control mechanisms of production by digital...

SECONDARY TREATMENTS The most important of this section are the new complete lines of treatment for large flows. Salher can design and supply prefabricated plants up to 20000 population/equivalent, either through prefabricated plate tanks or equipment built as part of civil engineering works. We also design plants to be installed on platforms or modular and transportable to deal with emergencies. TERTIARY TREATMENTS All prices of tertiary systems have been updated after being redesigned. WATER PURIFICATION Since 2014, custom-made drinking water treatment plants have been supplied. In the...

Primary treatments Secondary treatments Tertiary treatments Water purification Oil/water separators Pumping stations Sludge treatment and thickeners

Manual screens Coarse screen with manual cleaning REF: CVA-ARG AND ARF10 REF: CD-ARG AND ARF10 Coarse and fine screen with manual cleaning for installation in GFRP canal REF: CD-MA-D 11 Semi-automatic screens Coarse and fine screen, manual and automatic cleaning, for installation in GFRP canal REF: CD-MA-RAC12 Fine screen with automatic cleaning for civil construction REF: RAC 13 Automatic screens Sieve for coarse solids for installation on pumping stations and manholes REF: TA-HEL-MINI14 Manhole for TA-HEL-MINI REF: CARCASA TA-HEL-MINI15 Helical screw sieve with automatic cleaning, waste...

• Removal of coarse solids equal or larger than 10/30 mm from wastewater. ^Characteristics: | • Manhole in GFRP (Glass Fiber Reinforced Polyester) with orthophthalic resins. • Stainless steel retention screen solids with mesh of 10 and 30 mm. • Manual cleaning through GFRP cover. • PVC inlet and outlet. • Stainless steel scraper to remove solids. Catalogue - 2019V2.11 Data and models of the table may vary.

Manual screens Coarse and fine screen with manual cleaning for installation in GFRP canal • Removal of solids equal or larger than 6 mm from wastewater. ^Characteristics: | • Canal manufactured in GFRP (Glass Fiber Reinforced Polyester) with orthophthalic resins. • Stainless steel screen with mesh of 30 mm for coarse solids. • Stainless steel screen with mesh of 6 mm for fine solids. • Manual cleaning system. • PVC inlet and outlet. • Stainless steel perforated baskets for waste dehydration. • Canal with open top. • Stainless steel scraper for manual removal of solids. COARSE SCREEN...

• Removal of solids equal or larger than 6 mm. Characteristics^ • Canal manufactured in GFRP (Glass Fiber Reinforced Polyester) with orthophthalic resins. • Stainless steel screen with mesh of 30 mm for coarse solids. • Stainless steel screen with mesh of 6 mm for fine solids. • Manual cleaning system for primary screen and automatic for secondary screen. • PVC inlet and outlet. • Stainless steel perforated baskets for waste dehydration. • Canal with open top. • Stainless steel scraper for manual removal of solids. • Float level switch for emergency start. • Electrical panel board in...

Semi-automatic screens Fine screen with automatic cleaning for civil engineering • Removal of solids equal or larger than 6 mm. • Stainless steel screen with perforated mesh of 6 mm. • Automatic cleaning system. • Stainless steel perforated basket for waste dehydration. • Electrical panel board in option. • Float level switch for emergency start. FINE SCREEN FLOAT LEVEL SWITCH Catalogue - 2019V2.11 Data and models of the table may vary.

Automatic screens Sieve for coarse solids for installation on pumping stations and manholes • Removal of solids equal or larger than 15 mm. Screen manufactured in stainless steel with perforated mesh of 15 mm (For other mesh, please consult). Endless screw manufactured in micro-alloy steel. Possibility to install on canalisation. Motor reducer of 0,37 kW. Float level switch. Screening and transportation of solids with no maintenance. NOTE: Pretreatments are mainly designed for standard urban wastewater. For industrial discharges or others, consult and wait for confirmation. Catalogue -...

Automatic screens REF: CARCASA TA-HEL-MINI Function: • Manhole manufactured in GFRP (Glass Fiber Reinforced Polyester) with orthophthalic resins. CARCASA TA-HEL-MINI ELECTRICAL PANEL BOARD (OPTION) Catalogue - 2019V2.11 Data and models of the table may vary.

D Automatic screens Helical screw sieve with automatic cleaning, waste dehydration and compaction, for installation in civil engineering canal • Removal of solids equal or larger than 3 mm, waste dehydration and compacting system. €characteristics-i • Totally demountable stainless steel AISI 304 equipment. • Fine screen in stainless steel with opening size from 3 to 10 mm. • Endless screw manufactured in micro-alloy steel, no central shaft, working angle of 35°. • Continuous cleaning system of mesh with brushes placed on the endless screw. Automatic cleaning system: * Cleaning electrovalve...

Automatic screens Helical screw sieve for fine solids with automatic cleaning, waste dehydration and compacting system, for aboveground installation • Removal of solids equal or larger than 3 mm, waste • Automatic cleaning system: dehydration and compacting system. * Cleaning electrovalve N/C 1/2”: cleaning system • Ideal for installation down the pumping stations. automation. * Filter in Y 1/2”: protection and retention of particles carried by the cleaning water. * Ball valve 1/2”: closure of the cleaning connection if necessary. Safety switch on top cover. Totally dismountable stainless...