Gear pumps and motors in aluminium alloy, available inEuropean, German and S.A.E. standard. Displacements from 1.1 cc/rev. (0.06 cu.in./rev.) to 5.5 cc/rev (0.35 cu.in./rev) for 1P/MB, from 1.1 cc/rev. (0.06 cu.in./rev.) to 7.5 cc/rev (0.457 cu.in./rev) for 1,5P/MB and from 1.4 cc/rev. (0.081 cu.in./rev.) to 6.1 cc/rev (0.369 cu.in./rev.) for 1,6P/MB. Face gear pumps in aluminium alloy, available in European, German and S.A.E. standard. Displacements from 8 cc/rev. (0.50 cu.in./rev.) to 22.5 cc/rev. (1.4 cu.in./rev.). Pompes ؠ engrenages double denture dcal੩e construitesen alliage daluminium, disponibles en standard ҩuropen,allemand et amricain S.A.E.Cylindr驩es de 8 cc/tour (0.50 cu.in./tour) 22.5 cc/tour(1.4 cu.in./tour). Pompes et moteurs engrenages avec corps en alliagedࠒaluminium, disponibles en standard uropen, allemandet am驩ricain S.A.E.Cylindres de 1.1 5.5 cc/tour (0.35 cu.in./tour) pour 1P/MB,de 1.1 cc/tour (0.06 cu.in./tour)頠 7.5 cc/tour (0.457 cu.in./tour) pour 1,5P/MBet de 1.4 cc/tour (0.081 cu.in./tour) 6.1 cc/tour (0.369 cu.in./tour) pour 1,6P/MB. > ADVANTAGES Important reduction of noise level in comparison with traditional external gear pumps Especially suitable for all applications where a low noiselevel is required, such as AC industrial power stations andDC electropumps. LES AVANTAGESDiminution importante du niveau sonore par rapport auxpompes engrenages externes traditionellesParticuliࠨrement adapte pour toutes les applications o l鹒onrecherche un niveau sonore bas, comme par exemple lescentrales hydrauliques industrielles AC et les electropompesDC Italgraf - Rubiera (RE) Gear pumps and motors in aluminium alloy, available in European, German and S.A.E. standard. Displacements from 4.5 cc/rev. (0.27 cu.in./rev.) to 26 cc/rev (1.58 cu.in./rev.) for 2P/MB and from 16 cc/rev. (0.97 cu.in./rev.) to 44 cc/rev (2.69 cu.in./rev.) for 2,5P/MB. Gear pumps and motors in spheroidal cast iron, availablein S.A.E. standard. Displacements from 21 cc/rev. (1.3 cu.in./rev.) to 90 cc/rev. (5.4 cu.in./rev.). Pompes et moteurs engrenages avec corps en alliagedaluminium, disponibles en standard ҩuropen, allemandet amricain S.A.E.Cylindr驩es de 4.5 cc/tour (0.27 cu.in./tour) 26 cc/tour(1.58 cu.in./tour) pour 2P/MB et de 16 cc/tour (0.97 cu.in./tour) 44 cc/tour (2.69 cu.in./tour) pour 2,5P/MB. Pompes et moteurs ࠠ engrenages avec corps en fontespheroidale, disponibles en standard amricain S.A.E..Cylindres de 21 cc/tour (1.3 cu.in./tour) 驠 90 cc/tour(5.4 cu.in./tour). > ADVANTAGES Developed for high loads Oil contamination and non-flammable fluids resistant LES AVANTAGESEtudie et developpe pour conditions de travail s驩vres.Rsistante 詠 la pollution du fluide ainsi quҠ lutilisation defluides ininflammables Gear pumps and motors in aluminium alloy, available in European, German and S.A.E. standard. Displacements from 21 cc/rev. (1.25 cu.in./rev.) to 65 cc/rev. (3.85 cu.in./rev.) for 3P/MB and from 55 cc/rev. (3.34 cu.in./rev.) to 98 cc/rev. (6.03 cu.in./rev.) for 3,5PC/MC. > RANGE OF PRODUCTS GAMME DE PRODUCTION Pompes et moteurs Ҡ engrenages avec corps en alliagedaluminium, disponibles en standard ҩuropen, allemandet amricain S.A.E.Cylindr驩es de 21 cc/tour (1.25 cu.in./tour) 65 cc/tour(3.85 cu.in./tour) pour 3P/MB et de 55 cc/tour (3.34 cu.in./tour) 98 cc/tour (6.03 cu.in./tour) pour 3,5PC/MC. > TM SALAMI spa via Emilia Ovest 100641100 Modena Italytelefono 059 387411telefax 059 387500 [email protected] ITALIA srlstrada Pelosa 183S. Pietro in Trigogna VIItalytelefono 0444 240080telefax 0444 [email protected] ESPANAPoligono Industrial Amenteres C/Primer de Maig, 18 Nave 408980 San Feliu de LlobregatBarcelonatelefono 93.6327288 telefax 93.6667826 [email protected] FRANCE22, rue Louis Saillant 69120 Vaulx en Velin Lyon telefono 04 78 80 99 41 telefax 04 78 80 36 69 [email protected] 149 SO. Chenango St.Ext., GEEN, NY 13778telefono 001.607.6565702telefax [email protected]

Sectional valve with symmetrical oil distribution.Nominal flow up to 45 l/Min (12 U.S.gpm) and pressureup to 315 bar (5000 p.s.i.). > VDM07: Monoblock valve with nominal flow up to 50 l/Min(14 U.S.gpm) and pressure up to 280 bar (4000 p.s.i.). Pressure compensated valve for fixed or variable displacement pumps, with pressure compensator on each section. Flow up to 130 l/Min (36 U.S.gpm) and pressure up to 315 bar (5000 p.s.i.). VDM09: Monoblock valve with nominal flow up to 75 l/Min(20 U.S.gpm) and pressure up to 280 bar (4000 p.s.i.). Specifications: high resistance cast iron body; hardenedand...