Catalog excerpts
1.5 PE Aluminium gear pumps Tecnical Catalogue and Dealer management Company with quality system certified by DNV UNI EN ISO 9001/2008
Open the catalog to page 1L’Azienda Salami Spa rappresenta un’eccellenza italiana nel settore della potenza idraulica applicata a macchine mobili e veicoli industriali. E’ stata fondata nel 1956 con precise linee guida che hanno condotto il marchio Salami a identificarsi come simbolo di Garanzia e Affidabilità nel proprio settore, in Italia e nel Mondo. Salami Spa è rimasta fedele nel tempo ai tre punti di forza dettati dal suo fondatore che hanno reso riconoscibile e grande il marchio Salami nel mondo: Qualità, Innovazione, Servizio. Attraverso le proprie sedi di Spagna, Francia, Stati Uniti d’America, Canada e ai...
Open the catalog to page 2The Salami Company is one of the best Italian engineering excellences in the field of fluid power applied to mobile applications. It was founded in 1956 with specific guidelines that have led the brand to identify Salami as a symbol of Warranty and Reliability in its sector, in Italy and in the World. Salami Hydraulics proudly manufactures in Italy and it has remained loyal in time to its three strengths dictated by its founder. Quality, Innovation and Service have made the brand Salami recognizable and great in the world. Through its offices in North America, Spain, France, together with its...
Open the catalog to page 3GEAR PUMPS “E” SERIES General Index SECTION A - 1.5PE TECHNICAL CATALOGUE FEATURES • ASSEMBLING DIMENSIONS AND VALUES OF PRESSUR AND SPEED • AVAILABLE PORTS • MULTIPLE GEAR PUMP - DIMENSIONS AND FEATURES •
Open the catalog to page 4GEAR PUMPS “E” SERIES General Index • AVAILABLE FLANGES SECTION B - 1.5PE PUMP FOR DEALER MANAGEMENT •
Open the catalog to page 51.5 PE Aluminium gear pumps Section A - Tecnical catalogue
Open the catalog to page 6GEAR PUMPS “E” SERIES P3 = Peak pressure P2 = Intermittent operating pressure (1/3 of working time) P1 = Continuous operating pressure max. 20 s GENERAL • Superior performance andand reliability in heavy-duty hydraulic application Superior performance reliability in heavy-duty hydraulic application. • Construction with large area, high efficiency Construction with large area, low-friction and long life in severe operating environments bushings provide strength, high efficiency, and long life in severe operating environments. • The design includes an advanced bushing andand seal configuration,...
Open the catalog to page 7DRIVE SHAFTS Radial and axial loads on the shafts must be avoided since they reduce the life of the unit. DIRECTION VIEWED AT THE DRIVE SHAFT Clockwise rotation Anti - clockwise rotation HYDRAULIC PIPE LINE To ensure favorable suction conditions it is important to keep pressure drop in suction pipe line to a minimum value To calculte hydraulic pipe line size, the designer can use; as an approximate guide, the following fluid speed figures: From 1 to 2 m/sec on suction pipe line ram 6 to 10 m/sec on pressure pipe line From 3.28 to 6.36 ft/sec on suction pipe line From 19.7 to 32.8 ft/sec on...
Open the catalog to page 8GEAR PUMPS "E" SERIES FILTRATION INDEX RECOMMENDED
Open the catalog to page 9GEAR PUMPS “E” SERIES ROTATION CHANGE INSTRUCTION unscrew and take off the 4 assembling bolts. ANTI-CLOCKWISE take off the front flange, complete of shaft seal. In case of key, it has to be taken off before of the flange. To avoid the damage of the shaft seal. Step 3: take note of the assembling position of the bronze thrust plate. If necessary, you can put a mark which help you remembering the position of the plate related to the body.This is very important, because at the end you must reassemble it in this way. Step 4: take off the bushing. Step 5: take off both the shafts, drive and...
Open the catalog to page 10GEAR PUMPS “E” SERIES SPOOL CONTROLS SUGGESTED COMBINATIONS OF FLANGES AND SHAFTS AVAILABLE 1.5 PE 1,6PE CODE P0 - (Ø25,4 mm) European stand. CODE P01 - (Ø30 mm) European stand.
Open the catalog to page 11GEAR PUMPS “E” SERIES Showed release with flange P0 and shaft 18 Performance carried out with oil viscosity at 16 cSt and oil temperature at 60°C. 1,4 cm3/rev Working pressure Intermittent pressure P2 Peak pressure *For working conditions, using exclusively pressure P1, the value of max. speed must be reduced of 15%. - *ALL FLANGES HAVE THIS THICKNESS, EXCEPT CODE S1 (SEE PAG. A10 - A11) - PORT TYPES AND SIZES ON PAGE A7 - AVAILABLE SHAFTS ON PAGE A12
Open the catalog to page 12GEAR PUMPS “E” SERIES AVAILABLE PORTS INLET TYPE A From 1.4 to 6.2 From 7.6 to 11 British standard pipe parallel (BSPP)
Open the catalog to page 13GEAR PUMPS “E” SERIES Showed release with flange S0 and shaft 80 Performance carried out with oil viscosity at 16 cSt and oil temperature at 60°C. 1,4 Working pressure Intermittent pressure P2 Peak pressure *For working conditions, using exclusively pressure P1, the value of max. speed must be reduced of 15%. - *ALL FLANGES HAVE THIS THICKNESS, EXCEPT CODE S1 (SEE PAG. A10 - A11) - AVAILABLE SHAFTS ON PAGE A12 - PORT TYPES AND SIZES ON PAGE A7 - COMMON SUCTION PORT SIZE ON PAGE A9
Open the catalog to page 14SPEED m/sec SPEED m/sec PIPE INTERNAL AREA - cm2 In case of common suction configuration, we have to take care of the area of the common suction port to avoid cavitation. The suggested speed of the oil at suction line is 1.5 m/sec, using this table and according of which is the total flow which goes into the pump, you can obtain the value of the proper diameter (mm) and proper area (cm2). GEAR PUMPS “E” SERIES FOR REASON OF READABILITY, IN CASE OF INTENSIVE USE, WE CAN PROVIDE THE FOLLOWING TABLE AS A STANDALONE EXCEL FILE, WITH MORE DETAILED DATA(VALUES OF SPEED AND FLOW)
Open the catalog to page 15GEAR PUMPS “E” SERIES AVAILABLE FLANGES European standard mounting flange Material: cast iron Available assembling shafts 6.5 N.4 HOLES O .26 European standard mounting flange Material: cast iron Available assembling shafts
Open the catalog to page 16AVAILABLE FLANGES SAE AA mounting flange (2 bolts) Material: cast iron Available assembling shafts GEAR PUMPS “E” SERIES SAE mounting flange (4 bolts) Material: cast iron Available assembling shafts
Open the catalog to page 17All SALAMI catalogs and technical brochures
-
2PE
42 Pages
-
3.5PC_Technical Catalogue
26 Pages
-
2PGE_Technical Catalogue
34 Pages
-
2ME_Technical Catalogue
28 Pages
-
2.5MB_Technical Catalogue
24 Pages
-
1.5ME_Technical Catalogue
20 Pages
-
3PE and 3ME
53 Pages
-
VDP08 and JOYSTICK oem and dealers
116 Pages
-
VD10A - VD12A
32 Pages
-
GROUP 3.5 - B SERIES
25 Pages
-
GROUP 2.5 - B SERIES
29 Pages
-
GROUP 2 - E SERIES
35 Pages
-
E series
15 Pages
-
PG330
34 Pages
-
PLC series
11 Pages
-
VDP08
46 Pages
-
VDP8
42 Pages
-
VDM8 series
38 Pages
-
VDM9
22 Pages
-
VDM6A series
35 Pages
-
VDM6
38 Pages
-
VD8A series
48 Pages
-
VD6A series
56 Pages
-
PG301 series
13 Pages
-
H series
33 Pages
-
E series
13 Pages
-
E series
26 Pages
-
B series
32 Pages
-
E series
20 Pages
Archived catalogs
-
Product range
2 Pages