Road Planer A 28 ton, fast mobilization speed milling machine. It makes milling jobs profitable, especially jobs on city roads with manholes, curbs, etc. and frequent short distance hauls. Cost and time savings mobilization speed of 27 km / h (17mph) saves time and cost by eliminating the use of a trailer for hauls less than 20 km (13 miles ). ◦ A single operator controls the entire machine. ◦ Fast Efficient operation 2,050 mm ( 81 in) and maximum cutting depth of 230 mm (9 in). drum side-shift system with 450 mm (18 in ) on both sides provides ; 1) Accurate milling position. 2) Milling operations tight to adjacent structures such as curbs and walls. 3) Easy clear of manholes, utility poles, etc., on city streets. ◦ Minimum side clearance of 105 mm (4 in) and the maximum curb clearance of 400 mm (16 in) on both sides of the drum enable quick and accurate flash cutting along curbs. ◦ Smooth milled surface results from a long wheel base design and four rear wheels mounted on a bogey suspension similar to a motor grader system. ◦ Drum width of ◦ Unique High safety standard ◦ Emergency brake switch is located in four different places around the Easy maintenance ◦ Easy access to the cutting teeth by opening the rear cover of the drum hood. Engine 3 ( ER552F, 418 kW / 568 HP ) and non-Tier 3 ( ER552F-s, 365 kW/ 496 HP ) engines are available. SERVICE HOTLINE Road Maintenance Machine & Others

Road Planer TYPE MODEL　 CHASSIS MODEL WEIGHTS Operating weight Load on front axle [operating weight] Load on rear axle [operating weight] PERFORMANCE Speed range (travel) Speed range (operating) Gradability Min. turn radius (outer) DIMENSIONS Overall length Overall width Overall height [operate / shipping] Tire size × Number of tires kPa (psi) CUTTER Cutting width SYSTEM Cutting depth [max.] Side clearance ※ Using low quality fuel may cause engine failure. LOADING Belt width SYSTEM Loading height Swing angle ENGINE Make Displacement Rated output Diesel, water cooled, 4 cycle, 6 cylinder, with...