Fluid Performance Features and Benefits • Provides resiliency, long-life, and durability • Ultra-smooth inner bore reduces risk of particulate entrapment • Taste and odor free • Withstands temperature extremes from -50°C to 200°C Typical Applications • Food and Beverage Dispensing Regulatory Compliance • French Order of November 25, 1992 Regulation (EC) No 1935/2004 Versilon" SPX-60 FB High-Strength Silicone Tubing Designed for Demanding Requirements Peroxide-cured Versilon" SPX-60 FB silicone tubing is designed for use in applications where flexibility resiliency and durability are required. Produced from a proprietary combination of silicon elastomers, this tubing optimizes critical physical properties such as tensile strength elongation and compression set, resulting in a more physically durable product. The smooth inner surface of the tubing reduces the risk of particulate entrapment and microscopic buildup during fluid transfer. Consistently Reliable Results Every lot of raw material used in the manufacture of Versilon" SPX-60 FB silicone tubing undergoes a series of in-house physical property testing before use. This stringent evaluation of ingredients helps to provide the repeatable quality found in every foot of Versilon" SPX-60 FB tubing. Tubing sample testing is performed every year. Heavy metals extraction analysis, as well as, cytotoxicity testing is performed to confirm the tubing’s biocompatibility. The Leader in Silicone Tubing Innovation Versilon" SPX-60 FB tubing provides versatility in use for a broad range of applications. However, for situations requiring uniquely engineered properties, Saint-Gobain Process Systems can design a tubing formulation suited to meet your specific needs. Specialty formulations may be designed to provide a combination of features - including ultra-high temperature resistance, electrical conductivity, closed cell sponge, pigmented colors, and long flexural life.

www.processsystems.saint-gobain.com Sizes Typical Physical Properties ID OD Wall Thickness Min. Bend Radius Unless otherwise noted, all tests were conducted at room temperature 73°F (23°C). Values shown were determined on 0.075” (1.905 mm) thick extruded strip or 0.075” (1.905 mm) thick molded ASTM plaques or molded ASTM durometer buttons. Sterilization Methods Steam (134 °C @ 18 mn) Gas - Ethylene Oxide Radiation - Gamma or E-Beam The values listed for working and burst pressures are derived from tests conducted under controlled laboratory conditions. Many factors will reduce the tubing's...