Catalogs >
Saint-Gobain Performance Plastics - Process System >
Versilon™ C-544-A IB

Versilon™ C-544-A IB
2Pages

Catalog excerpts

Multi-Purpose, Abrasion Resistant Tubing Features and Benefits • Exceptional abrasion and tear resistance • Tough braid reinforcement for elevated working pressures Specially formulated from tough ether-based polyurethane resins, Versilon C-544-A IB tubing is ideal for use in some of the most physically demanding applications. When exposed to abrasive conditions, the excellent wear properties of Versilon C-544-A IB tubing frequently outperforms traditional rubber, plastic and metal materials. • Excellent resistance to oils, greases, and fuels More flexible than many other reinforced urethane tubing, Versilon C-544-A IB tubing can often be used in applications requiring a tight bend radius where other tubes have collapsed and failed. Versilon C-544-A IB tubing also retains much of its unique flexibility even at temperatures as low as -100°F (-73°C). Typical Applications Versilon C-544-A IB tubing meets FDA 21 CFR, 177.1680 and 177.2600 criteria for food contact applications. ™ • Retains flexibility in sub-zero environments • Food and cosmetic processing • Abrasive and viscous slurry transfer • Lubrication and degreaser dispensing • Pellet and powder transfer • Pneumatic sensory devices Excellent Stability • Instrumentation control lines While many rubber and plastic materials exhibit resistance to certain solvents, oils, and chemicals, Versilon™ C-544-A IB tubing will resist a much wider range of substances. Regulatory Compliance Plasticizer extraction leading to embrittlement is one of the most frequent causes of failure when flexible tubing is exposed to harsh chemicals. Versilon™ C-544-A IB tubing is plasticizer-free and remains flexible even when cycled through temperature extremes. • Coolant recovery systems • Meets FDA criteria for food contact • FDA 21 CFR, 177.1680 and 177.2600 • Meets NSF 61 criteria for potable water contact* Large Bore Stock Sizes Ideal for Bulk Transfer Reinforced for elevated pressure, Versilon C-544-A IB tubing can easily handle applications requiring large volume transfer of high viscosity fluids, pastes, and slurries. It is conveniently available from inventory in a wide variety of common sizes up to 2” inner diameter. ™ PROCESS SYSTEMS * NSF has length restrictions, determin

Open the catalog to page 1

Part Number Wall Thickness Vacuum Rating Unless otherwise noted, all tests were conducted at room temperature 73°F (23°C). Values shown were determined on 0.075" thick extruded strip or 0.075" thick molded ASTM plaques or molded ASTM durometer buttons. The values listed for working and burst pressures are derived from tests conducted under controlled laboratory conditions. Many factors will reduce the tubing's ability to withstand pressure, including temperature, chemical attack, stress, pulsation and the attachment to fittings. It is imperative that the user conduct tests simulating the...

Open the catalog to page 2