Catalogs >
Saint-Gobain Performance Plastics - Process System >
Versilon™ C-210-A

Versilon™ C-210-A
2Pages

Catalog excerpts

VERSIL# N Fluid Performance Versilon™ C-210-A Features and Benefits • Consistently tight dimensional tolerances • Excellent abrasion and tear resistance • Excellent resistance to oils, greases and fuels • Retains flexibility in sub-zero environments • High tear resistance Typical Applications • Abrasive and viscous slurry transfer • Lubrication and degreaser dispensing • Pellet and powder transfer • Pneumatic sensory devices • Instrumentation control lines • Coolant recovery systems Oil, Fuel and Grease Resistant Tubing Exceptional Properties Our rigidly controlled manufacturing process makes Versilon™ C-210-A tubing the flexible polyurethane tubing that has consistent tight tolerances from lot to lot. Made of tough ester-based polyurethane, Versilon™ C-210-A tubing's clarity, high tear strength and excellent abrasion resistance make it ideal for many applications, including fuel and lubricant lines, pneumatic lines, abrasive product transfer and cable jacketing. It also offers exceptional resistance to oils, greases, fuels and many other chemicals. Versilon™ C-210-A tubing is able to withstand rugged daily use; it resists weathering and can be safely used in temperatures ranging from -100°F (-73°C) to 200°F (93°C). Excellent Stability Even When Exposed to Oils, Greases and Fuels While many rubber and plastic materials exhibit resistance to certain solvents, oils and chemicals, Versilon™ tubing will resist a much wider range of substances. Plasticizer extraction leading to embrittlement is one of the most frequent causes of failure when flexible tubing is exposed to harsh chemicals. Versilon™ C-210-A tubing is plasticizer-free and remains flexible even when cycled through temperature extremes. Easy and Secure Attachment to Fittings Versilon™ C-210-A tubing's precision tolerances and high elasticity provide the user with an easy, worry-free attachment to fittings.

Open the catalog to page 1

Versilon™ C-210-A ID OD Wall Thickness Min. Bend Radius Max. Working Pressure Vacuum Rating Part Number - * Working pressures are calculated at a 1:5 ratio relative to burst pressure using ASTM D1599. ** Made to order, minimums will apply. Typical Physical Properties Property ASTM Method Durometer Hardness (Shore A), 15 sec Unless otherwise noted, all tests were conducted at room temperature (73°F). Values shown were determined on 0.075” thick extruded strip or 0.075” thick molded ASTM plaques or molded ASTM durometer buttons. The values listed for working and burst pressures...

Open the catalog to page 2