Tygon S3™ B-44-4X Phthalate-free Flexible Tubing for Food and Beverage Dispensing Tygon S3™ B-44-4X tubing from Saint-Gobain Performance Plastics is now phthalate-free. Saint-Gobain is proud to be among the first companies to offer sustainable flexible tubing products. The bio-based Tygon S3™ line combines the high performance standards customers demand with an eco-friendly tubing design. Preferred Tubing of the Food Industry Producers of food, milk and dairy products insist upon Tygon S3™ B-44-4X tubing for dependable performance in countless filling, draining, transfer and processing applications. Its smooth, non-porous bore inhibits particle entrapment, promoting a sanitary fluid path by minimizing potential for bacterial growth. It has outstanding resistance to harsh alkaline cleaners and is equally unaffected by commonly used sanitizers. Features and Benefits • mooth, non-porous bore will not trap S particulates or promote bacterial growth • esistant to harsh alkaline cleaners* R and sanitizers • xcellent alternative to rigid E piping systems • Contains no BPA or phthalates Typical Applications* • septic filling A • ondiment dispensing C Lightweight, Flexible and Clear Light in weight and easy to handle, Tygon S3™ B-44-4X tubing can be put into service quickly. It readily bends to accommodate abrupt corners and obstructions, requiring a minimum of couplings and fittings. Its flexibility can save up to one-third the footage and much of the labor required to install rigid stainless steel or plastic piping. Its glass-like clarity allows the user to see product flow through it, so visual monitoring of flow is easy. This is particularly helpful in controlling or adjusting flow during process. • itamin and flavor concentrate systems V • Soft-serve dispensing Regulatory Compliance* • Complies with FDA, NSF, 3-A, Japan Food Sanitation Law # 370/1959, REACH, 1935/2004/EC and 10/2011/EU for many foods and beverages • oes not contain chemicals listed in D California's Proposition 65 * or complete compliance information and F appropriate use instructions, please refer to the detailed document of compliance. The complete compliance information and use instructions can be found at www.

Typical Physical Properties Part Number Vacuum Rating ASTM Method Durometer Hardness, Shore A, 15s Unless otherwise noted, all tests were conducted at room temperature 73°F (23°C). Values shown were determined on 0.075” (1,905 mm) thick extruded strip or 0.075” (1,905 mm) thick molded ASTM plaques or molded ASTM durometer buttons. The values listed for working and burst pressures are derived from tests conducted under controlled laboratory conditions. Many factors will reduce the tubing's ability to withstand pressure, including temperature, chemical attack, stress, pulsation and the attachment...