Tygon S3™ B-44-4X IB
2Pages

{{requestButtons}}

Catalog excerpts

Tygon S3™ B-44-4X IB - 1

Tygon S3™ B-44-4X IB Reinforced Phthalate-free Flexible Tubing for Food and Beverage Dispensing Tygon S3™ B-44-4X IB tubing is designed specifically for food and beverage dispensing applications involving elevated pressure. Tygon pressure tubing has the identical product features found in Tygon S3™ B-44-4X tubing (clear, lightweight, flexible, smooth, non-porous bore to inhibit particle entrapment, outstanding resistance to harsh alkaline cleaners and unaffected by commonly used sanitizers), with reinforcement added to withstand up to four times the pressure. Flexibility to Deal with the “Twists and Turns” Lightweight and easy to handle, Tygon S3™ B-44-4X IB tubing goes into service quickly. It readily curves around corners and obstructions, requiring a minimum of couplings and fittings. Its flexibility can save up to one-third the footage and much of the labor required to install rigid stainless steel, glass tubing or piping. Reduces the Risk of Bacterial Contamination Tygon S3™ B-44-4X IB tubing's smooth non-porous inner bore resists particle entrapment and resultant bacterial growth. Its excellent non-wetting properties facilitate complete drainage and increase the overall effectiveness of cleaning, making it the ideal choice in food, beverage, dairy, and other bacterial-sensitive applications.* Virtually taste and odor free, Tygon S3™ B-44-4X IB tubing fully complies with FDA 175.300 criteria and the 3-A Sanitary Standards for food contact applications. It is listed under the NSF Standard 51.* Features and Benefits • andles four times the pressure of H non-reinforced tubing • mooth, non-porous bore resists S particle entrapment • lear wall enables visualization of fluid C flow • onnects easily to ReSeal® Sanitary C Fittings • ontains no BPA or phthalates C Regulatory Compliance* • DA 21 CFR 175.300 F • 3-A • SF 51 N • ontains no chemical listed in C California's Proposition 65 Ideal for Use with ReSeal® Reusable Sanitary Fittings By combining Tygon S3™ B-44-4X IB tubing with ReSeal ® Reusable Fittings, complete assemblies can be constructed, providing a contamination-free environment that maintains the purity of fluids being transferred. ReSeal assemblies are easy to install and can increase manufacturing efficiency by providing a fluid path that is able to be repeatedly sterilized using many conventional clean-in-place methods. * For complete compliance information and appropriate use instructions, please refer to the detailed document of compliance. The complete compliance information and use instructi

Open the catalog to page 1
Tygon S3™ B-44-4X IB - 2

Part Number Wall Min. Min. Bend Thickness Length Radius Vacuum Rating () (i) () 73°F 160°F 23°C 71°C inHg inHg mmHg mmHg Working pressures are calculated at a 1:4 ratio relative to burst pressure using ASTM DI599. Typical Physical Properties ASTM Value Method or Rating Durometer Hardness, Shore A, 15s Unless otherwise noted, all tests were conducted at room temperature 73°F (23°C). Values shown were determined on 0.075" (1,905 mm) thick extruded strip or 0.075" (1,905 mm) thick molded ASTM plaques or molded ASTM durometer buttons. SAINT-GOBAIN v_...

Open the catalog to page 2

All Saint-Gobain Performance Plastics - Process System catalogs and technical brochures

  1. Tygon® 2375

    2 Pages

  2. Furon fittings

    19 Pages

  3. HPVM

    2 Pages

  4. RDVM

    2 Pages

Archived catalogs

  1. GSR/GS

    2 Pages