Catalogs >
Saint-Gobain Performance Plastics - Process System >
Tygon S3™ A24 & S3™ A24-C

Tygon S3™ A24 & S3™ A24-C
1 / 2Pages

Catalog excerpts

Vacuum Tubing for Milking Equipment Tygon S3™ A24 tubing from Saint-Gobain Performance Plastics is now phthalate-free. Saint-Gobain is proud to be among the first companies to offer sustainable flexible tubing products. The bio-based Tygon S3™ line combines the high performance standards customers demand with an eco-friendly tubing design. Reduced Maintenance and Inspection Concerns Tygon S3™ A24 tubing is ideally suited for supply air transport. The smooth inner surface is less susceptible to particle entrapment, which can restrict air flow, while crystal clarity permits detection of equipment deficiencies such as backflow of milk into the air lines. Tygon S3™ A24 tubing is designed to work in tandem with Tygon S3™ M-34-R tubing to provide vacuum and easy flow within the milking process. The Mark of Quality Every foot of Tygon S3™ A24 tubing has been embedded with a trademark stripe within the tubing walls. The embedded stripe is your assurance of receiving genuine Tygon S3™ tubing, the world's finest raw milk tubing produced specifically for the dairy industry. Regulatory Standards Tygon S3™ A24 tubing complies with FDA 21 CFR 175.300, NSF**, 3-A and Japan Food Sanitation Law # 370/1959 for many foods and beverages. Tygon S3™ tubing products do not contain chemicals listed in California's Proposition 65. TYG#*N £ Safe Smart Sustainable f Features and Benefits • Holds full vacuum at room temperature • Will not crack and age like rubber tubing • Lightweight and flexible for quick installation • Non-wetting properties allow easy cleaning and complete drainage • Durability for long and reliable service • Contains no BPA or phthalates • To be used in conjunction with Tygon S3™ M-34-R Typical Applications* • Raw milk transport lines • Dairy processing * For complete compliance information and appropriate use instructions, please refer to the detailed document of compliance. The complete compliance information and use instructions can be found at www.TygonS3.com. ** Only US manufacturing sites are NSF compliant. For EU manufacturing sites, NSF compliance is in progress.

Open the catalog to page 1

E = Excellent F = Fair U = Unsatisfactory *All tests conducted at room temperature Tubing Properties Min. Bend Radius, inch (mm) 1-1/8 (28.57) Vacuum Rating at 73°F, inHg (mmHg) 29.9 (760) Product Characteristics Opacity A24 A24-C *Only US manufacturing sites are NSF compliant. For EU manufacturing sites, NSF compliance is in progress. Tygon S3™ A24 Cleaning Instructions To extend the usable life of Tygon S3™ A24 tubing and reduce the risk of bacterial growth resulting from a buildup of milksoil film, the following cleaning and sanitary procedures must be followed: 1. Following...

Open the catalog to page 2