Tygon® LP-1600
2Pages

{{requestButtons}}

Catalog excerpts

Tygon® LP-1600 - 1

Designed Specifically for Outboard Marine Applications TYG^N Excellence By Design Tygon® LP-1600 tubing low permeation fuel tubing meets the government's emission standards for clean air. Specially formulated for marine outboard fuel delivery applications, Tygon® LP-1600 tubing is EPA and CARB certified. Featuring a highly fuel-resistant, ethanol-compatible inner layer, Tygon® LP-1600 tubing has a robust design that ensures safe fuel transfer from the tank to the engine and provides both excellent fitting retention and fast, easy assembly. Regulatory Compliance Tygon® LP-1600 tubing is EPA and CARB certified to meet permeation emission standards of 15g/m2/day. This tubing also meets EPA B1-15 and CARB Outdoor Marine Tank (OMT) above-deck ratings for the marine industry, and American Boat and Yacht Council (ABYC) H-24 standards. Tygon® LP-1600 tubing conforms to SAE J1527 B1 standards. Features and Benefits • Thermoplastic multi-layer technology designed to provide the best barrier construction • Excellent resistance to hydrocarbon-based fuels (leaded and unleaded fuels) • Compatible with 100% ethanol • Wide temperature range from -20°F to 165°F (-28.9°C to 73.9°C) • Ozone and UV light resistant to prevent premature aging • High abrasion, cut and tear resistance for longer service life • Superior flexibility and kink resistance • Custom sizes and colors available Typical Applications • Marine boats with above-deck outboard engines • Personal watercraft - Jet Skis, WaveRunners • Portable marine fuel delivery system

Open the catalog to page 1
Tygon® LP-1600 - 2

www.processsystems.saint-gobain.comTygon® LP-1600 ID OD Wall Thickness Length Part Number (in.) (in.) (in.) (ft.) Unless otherwise noted, all tests were conducted at room temperature 73°F. Values shown were determined on 0.075" thick extruded strip, 0.075"thick molded ASTM plaques or molded ASTM durometer buttons. Regulatory Compliance 40 CFR I060 EPA Regulation The values listed for working and burst pressures are derived from tests conducted under controlled laboratory conditions. Many factors will reduce the tubing’s ability to withstand pressures, including...

Open the catalog to page 2

All Saint-Gobain Performance Plastics - Process System catalogs and technical brochures

  1. Tygon® 2375

    2 Pages

  2. Furon fittings

    19 Pages

  3. HPVM

    2 Pages

  4. RDVM

    2 Pages

Archived catalogs

  1. GSR/GS

    2 Pages