Clear, High-Performance Fuel Tubing for Small Engines TYG#N Excellence By Design Designed to Meet Clean Air Regulatory Standards and Maintain Flexibility in Frigid Temperatures Tygon® LP-1200 Low Permeation Fuel Tubing is specially designed to meet new EPA and CARB evaporative emission standards of 15g/m2/day. The patent-pending design and robust multi-layer construction offers superior fitting retention and resistance to swelling, hardening and cracking caused by hydrocarbon-based fluids. LP-1200 is also designed to retain flexibility in frigid temperatures. Its formulation helps to prevent rupture while mantaining tube flexibility, lowering the risk of fuel system failure in cold weather conditions. Available in both standard and custom sizes and colors, Tygon® LP-1200 tubing is ideal for lawn and garden power equipment, small engine fuel lines, and lubricating oil and grease transfer lines. It meets ANSI B175.1 Annex D standard. Available Sizes Tygon® LP-1200 tubing is available in five standard stock sizes: • 2/25” (2.032 mm) ID x 7/50” (3.556 mm) OD • 3/32” (2.381 mm) ID x 3/16” (4.762 mm) OD • 1/8” (3.175 mm) ID x 1/4” (6.350 mm) OD • 3/16” (4.762 mm) ID x 5/16” (7.937 mm) OD • 1/4” (6.350 mm) ID x 3/8” (9.525 mm) OD Typical Applications • Brush Cutters • Chainsaws • Cut-off Machines • Earth/Ice Augers • Edgers • Engine Drills • Hedge and Weed Trimmers • Leaf Blowers • Pole Pruners • Split-boom Products • Tillers Features and Benefits • Transparent - Easy to diagnose fuel flow or leak problems • Adaptable to Frigid Conditions - Maintains flexiblility in cold weather • High purity fluoropolymer inner liner - Reduces the risk of fuel system fouling from extractable solids found in typical rubber products • Superior fuel resistance and compatible with ethanol-enhanced fuels - Worry-free operation • Excellent fitting retention - 100% seal for optimum safety • Superior flexibility - Easy assembly, routing and optimized fuel pick-up • Excellent elasticity - Prevents "necking” from over-stretching during installation • Submersible* - Applicable with most fuel applications* UV resistant: Meets ANSI B175.1 Annex D Standard UV testing - Durable; long service life * Not recommended for reuse in higher temperature applications.

Tygon' LP-1200Tygon® LP-1200 Part Number Wall Thickness Pressure Rating *Working pressures are calculated at a 1:5 ratio relative to burst pressure using ASTM D1599. Typical Physical PropertiesProduct Characteristics ASTM Value roper y Method or Rating Flammability Rating Fuel Permeation (total tube), g/m2/d Durometer Hardness, Shore A, 15s Regulatory Compliance 40 CFR 1060 EPA Regulation The values listed for working and burst pressures are derived from tests conducted under controlled laboratory conditions. Many factors will reduce the tubing’s ability to withstand pressures, including...