Trusted Performance Tygon® Power F-4040-A Tubing HIGH PERFORMANCE FUEL AND LUBRICANT TUBING FOR SMALL ENGINES Designed to Resist Hydrocarbons Specifically designed to handle most fuels and industrial lubricants, Tygon® Power F-4040-A tubing resists the swelling and hardening caused by hydrocarbon-based fluids. This significantly reduces the risk of failure due to cracking and leakage. Its minimum extractability safeguards the liquid or vapor being transferred against adulteration. Features and Benefits • Resists embrittlement • Compatible with most hydrocarbons Because it is extremely flexible, Tygon® Power F-4040-A tubing simplifies installation, even in tight places. It is translucent yellow for positive identification and for easy flow monitoring. It is routinely used to handle gasoline, kerosene, heating oils, cutting compounds and glycol-based coolants. • Highly flexible, easy to install • Specifically developed for fuels and lubricants Routinely Specified in Fuel and Lubricant Applications A consistent performer lot after lot, Tygon® Power F-4040-A tubing is the most requested fuel and lubricant tubing for a variety of applications - from small engine fuel lines to coolant transfer. • Ozone and UV light resistant Other Tygon® formulations are available to meet new permeation standards. Typical Applications • Small engine fuel lines • General automotive • Recreational vehicles • Lawn and garden equipment • Coolant transfer Heating fuels Cutting compounds Polishing equipment Lubrication lines SAINT-GOBAIN Making a material impact around the world.

Tygon® Power F-4040-A Tubing Part Number OD Wall Thickness Length Vacuum Rating *Working pressures are calculated at a 1:5 ratio relative to burst pressure using ASTM D1599. Typical Physical Properties ASTM Value Property Method or Rating Durometer Hardness, Comparative Fuel Permeation Rate of Tubing The table below summarizes the results of an in-house study conducted on permeation of unleaded, alcohol-free 87 octane gasoline in 1/4” ID x 3/8” OD tubing. Testing was conducted in accordance with SAEJ1527. Competitive Fuel Tubing Fuel Permeation Rate (gm/m2/24 hours) The performance of tubing...