TYG#N Excellence By Design Tygon® E-65-FTaste & Odor Free, Long-Life Tubing for Food and Beverage Dispensing Formulated to withstand a temperature range from -112°F to 275°F, Tygon E-65-F tubing will not crack or deteriorate when used in demanding food and beverage applications. Extremely flexible, it resists kinks and retains its shape making installation quick and easy. Its excellent flexural fatigue resistance makes it the absolute best choice for use in peristaltic pumps found in dispensing equipment. Sensory Profile: Taste and Odor Free Tygon E-65-F was evaluated by an independent lab* in a blind taste test. The results support that this tubing can be referred to as taste and odor free for applications using milk, similar dairy products, and cola syrup. Excellent Chemical Resistance Tygon E-65-F tubing provides resistance to many food products, including those containing vegetable oils. It has excellent acid, alkali, and cleaner solution resistance, and is compatible with numerous oxidizing agents such as peroxide, hypochlorite and ozone. For the complete listing of common chemicals and their relative effect on Tygon E-65-F tubing, please refer to www.processsystems.saint-gobain.com. Features and Benefits • Taste and odor free • Long flex life in peristaltic pumps • Temperature resistant from -112°F to 275°F • Compatible with milk-based products, frozen yogurt, and soft-serve ice cream • Chemically compatible with a wide range of cleaners and disinfectants • Withstands pasteurization temperatures Regulatory Compliance • NSF 51 • Meets the applicable requirements of FDA Food Additive Regulations and Regulation (EC) No 1935/2004, (EU) 10/2011 for its intended use Typical Dispensing Applications • Bag-in-box juice • Frozen yogurt • Soft-serve ice cream • Gelato * Tufts University Sensory and Science Center, February 2018

Tygon® E-65-FTygon E-65-F Part Number OD Wall Thickness Length Max. Working Max Working Pressure Pressure Peristaltic Pump Tubing Life* Property ASTM Method Durometer Hardness, Shore A, 15 s Unless otherwise noted, all tests were conducted at room temperature 73°F (23°C). Values shown were determined on 0.075 in (1.905 mm) thick extruded strip or 0.075 in (1.905 mm) thick molded ASTM plaques or molded ASTM durometer buttons. Size of tubing tested is 1/8 in ID x 1/4 in OD. The values listed for working and burst pressures are derived from tests conducted under controlled laboratory conditions....