Pumpable Tubing for Food & Beverage Dispensing Soft and flexible, Tygon ® E-l000 tubing delivers superior performance in a formulation that contains non-DEHP [Bis (2-ethylhexyl) phthalate] plasticizers. Tygon ® E-l000 non-DEHP tubing has been tested rigorously to meet stringent standards for low temperature and corrosive chemical resistance. Ideal Selection for Complex Set-Ups Tygon ® E-l000 tubing is an excellent solution to applications requiring complicated set-ups with sharp radius curves and multiple directional changes. Tygon ® E-l000 tubing resists twisting and collapse, which are common problems when using other tubing products. Tygon ® E-l000 tubing stays flexible at temperatures as low as -67°F (-55°C). The Preferred Tubing in Low-Torque Peristaltic Pumps The extremely low durometer (40) of Tygon ® E-1000 tubing provides minimal resistance to compression. This feature is ideal when using low-torque or battery-driven peristaltic pumps. Tygon ® E-1000 tubing provides an excellent alternative to silicone tubing where corrosive chemicals are used. Tygon ® E-l000 tubing will typically outlast silicone tubing in peristaltic pump applications by a margin of 2 to 1. Features and Benefits • oft and flexible S • ow-temperature resistant L -67°F (-55°C) • esistant to corrosive chemicals R • ow durometer for use in L low-torque pump applications • eets FDA 21 CFR 175.300 M requirements for food contact Typical Applications • eristaltic pumps P •

Number (in) (mm) * Working pressures are calculated at a 1:5 ratio relative to burst pressure using ASTM D1599. Additional sizes available upon request. Pressure Rating Relative Chemical Resistance Properties2 Acids Bases Salts Alcohols Ketones Conc. Med. Weak Conc. Med. Weak FEEEEEEF U Regulatory Compliance FDA Approved for Food Contact * Only US manufacturing sites are NSF compliant. For EU manufacturing sites, NSF compliance is in progress. Typical Physical Properties Method Rating Unless otherwise noted, all tests were conducted at room temperature (73°F)....