Tygon® A-60-G High-performance Chemical Dispensing Alternative to Rubber Tubing Specially formulated for chemical dispensing, Tygon® A-60-G tubing outperforms neoprene, EPDM and other general-purpose tubing in test after test, application after application. It will not weaken or crack after years of exposure to heat and ozone, providing longer pump life in industrial and institutional cleaning-chemical dispensing applications. Engineered for outstanding performance and on-the-job reliability, Tygon® A-60-G tubing handles temperatures ranging from -75°F (-60°C) to 275°F (135°C), allowing the use of one material within a broad range of temperatures. It is heat sealable and can be joined without fittings. It also offers excellent resistance to inorganic fluids (acids and bases). Unequalled Life in Peristaltic Pump Applications Peristaltic pumps are used in a wide range of markets and applications, including industrial and institutional cleaning-chemical dispensing. The universal requirement common to these applications is the ability of the tubing to withstand the constant high flexural fatigue exerted by the pump rollers. Tygon® A-60-G tubing outlasts and outperforms virtually all other general service tubing in peristaltic pump applications due to its high flexural fatigue strength. (For additional details on peristaltic pump tubing, refer to the comprehensive Saint-Gobain Performance Plastics Peristaltic Pump Tubing section on www.processsystems.saint-gobain.com). Ideal for Use in Vacuum Systems Tygon® A-60-G tubing is available in standard vacuum sizes that will withstand a full vacuum (29.9" [759 mm] of mercury) at 73°F (23°C). Unlike typical rubber vacuum tubing, Tygon® tubing resists the cracking and aging that are frequent causes of vacuum tubing failure. Features and Benefits • Superior weathering • Abrasion resistant • Outstanding flexural fatigue resistance • Wide temperature range (-75°F to 275°F) • Low gas permeability versus rubber tubing • Ozone* and UV light resistant Typical Applications • Soap and disinfectant dispensing • Cleaning chemical transfer • Caustic chemical dispensing • Plating and etching chemicals • Glass and window wash sy

Wall Thickness *Working pressures are calculated at a 1:5 ratio relative to burst pressure using ASTM D1599 Typical Physical Properties Property Durometer Hardness, Shore A, 15s Tensile Strength, psi (MPa) Ultimate Elongation, % Tear Resistance, lb-f/in (kN/m) Specific Gravity Water Absorption, % at 73°F (23°C) for 24 hrs. Compression Set Constant Deflection, % at 158°F (70°C) for 22hrs. Maximum Recommended Operating Temp., °F (°C) Tensile Modulus, at 100% Elongation, psi (MPa) at 300% Elongation, psi (MPa) Vacuum Rating **Vacuum tubing sizes How Tygon® Tubing Compares with Neoprene® Tubing ASTM...