Tygon® 2375
1 / 2Pages

Catalog excerpts

Tygon® 2375 - 1

Chemical Resistant Tubing for Food and Beverage ApplicationsUnequaled Chemical Resistance In order to be effective in highly regulated industries such as hospitality and institutional cleaning, dispensing tubing materials must be resistant to the chemicals found in various cleaners used during the sanitation process, as well as those found in the food product itself. Depending on the food and beverage product, cleaner, and/or temperature to which the tube is exposed, the tubing may require varying levels of chemical resistance. For example, products with alcoholic or acidic content, such as wine or orange juice, can degrade or damage the tubing at a faster rate than products such as iced tea. Tygon® 2375 Chemical Resistant Tubing for food and beverage applications offers an unequaled combination of chemical resistance, clarity and flexibility. Tygon® 2375 tubing is virtually unaffected by acids, bases, ketones, salts, and alcohols (see Relative Chemical Resistance Properties chart on the second page). Environmentally Friendly Tygon® 2375 Chemical Resistant Tubing offers safe disposal. When properly incinerated, it does not release hazardous and corrosive hydrochloride gas, which contributes to acid rain. Non-DEHP and Plasticizer-Free Tygon® 2375 Chemical Resistant Tubing is entirely free of plasticizers, eliminating fluid contamination as well as premature embrittlement and cracking common with many other flexible tubing products. • Outstanding chemical resistance • Does not alter the food media taste • Great flexibility and bend radius • Non-DEHP for high purity • Plasticizer-free for low extractable • Safer disposal - Releases no harmful and corrosive hydrochloride gas • Smoother inner surface - Provides better flow and inhibits particulate buildup • Low sorption - Minimizes cross-contamination • Clear tubing for easier and better observation Regulatory Compliance* • FDA CFR 177.1520 criteria for food and beverage use • EU Regulation 10/2011** • NSF-51 • REACH * For complete compliance information and appropriate use instructions, please refer to the detailed document of compliance. * Not Recommended for use in higher temperature applications. PROCESS SYSTEMS

Open the catalog to page 1
Tygon® 2375 - 2

www.processsystems.saint-gobain.comTygon® 2375 Part Number Minimum Bend Max. Working Radius Pressure Vacuum Rating Relative Chemical Resistance Properties* ASTM Value or Method Rating Durometer Hardness (Shore A), 15 sec Unless otherwise noted, all tests were conducted at room temperature (73°F). Values shown were determined on 0.075” thick extruded strip or 0.075” thick molded ASTM plaques or molded ASTM durometer buttons. E = Excellent F = Fair U = Unsatisfactory *All tests conducted at room temperature. The values listed for working and burst pressures are derived from tests...

Open the catalog to page 2

All Saint-Gobain Performance Plastics - Process System catalogs and technical brochures

Archived catalogs

  1. Furon fittings

    19 Pages

  2. HPVM

    2 Pages

  3. RDVM

    2 Pages

  4. GSR/GS

    2 Pages