*mydirectindustry

P2G

P2G

Product catalog summary

Overview: This document provides technical specifications and performance data for the P2G series hydraulic motors manufactured by SAI Spa, located in Modena, Italy. The information is provisional and subject to change.

Specifications:

Displacement: Ranges from 192 to 623 cm³/rev across different models (200 to 630).
Bore: Varies from 35 mm to 63 mm.
Stroke: Consistent at 40 mm for all models.
Specific Torque: Increases from 3.0 Nm/bar to 9.73 Nm/bar.
Continuous Pressure: Uniform at 250 bar for all models.
Peak Pressure: Ranges from 280 bar to 425 bar depending on the model.
Continuous Speed: Varies from 400 rpm to 550 rpm.
Maximum Speed: Ranges from 650 rpm to 800 rpm.
Peak Power: Consistent at 59 kW for all models.
Approximate Mass: 51 kg.
Motor Casing Oil Capacity: 2 liters.

Performance Considerations: The continuous or average working pressure should be selected based on the desired service lifetime, particularly the bearing lifetime.

Dimensional and Spline Data: The document includes detailed dimensional drawings and spline data, specifying tolerances and measurements for various components.

Catalog excerpts

TABELLA DI PERFORMANCE PERFORMANCES TABLE P2G Displacement / Cilindrata Bore / Alesaggio Stroke / Corsa Specific torque / Coppia spec. Cont. Pressure / Press. Cont. Peak pressure / Press. Picco Cont. speed / Velocità Cont. Peak power / Potenza picco Approximative mass / Massa approssimativa Motor casing oil capacity / Capacità olio corpo motore Max casing pressure / Pressiona max. in carcassa SAI Spa 41122 Modena Italia www.saispa.it e-mail [email protected] La pressione continua o media di lavoro va determinata in funzione della vita del motore (vita dei cuscinetti). continuous Continuous or avarage working pressure should be chosen in function of the required service continuo lifetime (bearing lifetime). Provisional leaflets subjected to change without notice. All data are real and calculated according to existing project

Open the catalog to page 1

DIMENSIONI D'INGOMBRO DIMENSIONAL DRAWING SPLINE DATA e-mail [email protected] Provisional leaflets subjected to change without notice. All data are real and calculated according to existing project

Open the catalog to page 2