GM6
4Pages

Catalog excerpts

PERFORMANCES TABLE TABELLA DELLE PERFORMANCE Specific torque / Coppia spec. Nm/bar_26,40_33,20_39,20_47,50 Cont. Pressure / Press. Cont. bar_250_250_250_250 Peak pressure/Press. Picco bar 450 400 350 300 Cont. speed / Velocita Cont. rpm_250_225_200_175 Peak power/Potenza picco kW 170 170 170 170 Approximative mass / Massa approssimativa kg 271 Motor casing oil capacity / Capacita olio corpo motore I 25 _ 563 La pressione continua o media di lavoro va determinata in funzbne della picco ^ <^el mo'ore (vita dei cuscinetti). Max casing pressure / Pressiona max. in carcassa bar - contruous Q0nfjnuous a avarage working pressure should be chosen in function of tii the required service lifetime (bearing lifetime). it= Preferred motor type / Morote preferito SAI Spa - 41122 - Modena Italy - www.saispa.com - e-mail saispa@saispa.it

Open the catalog to page 1

Internal spline ! Calett. intern. BEARING OPTION E ONLY SOLO CON CUSC. TIPO E BEARING OPTION E ONLY SOLO CON CUSC TIPO E 109961 5 SAI Spa - 41122 - Modena Italy - www.saispa.com - e-mail saispa@saispa.it

Open the catalog to page 2

The graphs indicate the typical performance characteristics of the tWiHlcc motor operating with mineral oil with viscosity 40 cSt at 50 °C. I grafici si riferiscono alle caratteristiche del motore ^jgj cc operando con olio minerale avente viscosita BEARING LIFETIME The graph refers to the motor with the standard bearings. Note that the average lifetime of a bearing (Bso lifetime) is approximately 5 times the Bio lifetime. VITA CUSCINETTI II grafico si riferisce ai motori con i cuscinetti standard. Notare che la vita media di un cuscinetto (vita Bso) e circa 5 volte superiore alia vita Bw....

Open the catalog to page 3

BEARING OPTIONS Spherical roller bearings (Standard) - The lifetime of the standard bearings is given in the bearing lifetime Reinforced shaft and larger spherical roller bearings (option E) - the lifetime is 4.35 times the equivalent lifetime of standard bearings given in the graph. The BS 3550 spline shaft is available both in the standard and the reinforced "E" versions. cylindrical keyed shafts are only available in the For longer lifetimes contact our technical OPZIONl CUSCINETTl Cuscinetti a rulli orientabiti (Standard) - La durata del cuscinetti standard e ricavabiie dal grafico di...

Open the catalog to page 4