Multiple nozzles wall diffusers SagiCofim Technical features The long throw multiple nozzles wall diffusers have been designed specifically for wall installation, and its high induction provides an effective air mixing in the room. It is suitable for use by high temperature differential, up to 12 K. The nozzles are singularly adjustable to allow a control of the throw and a customization of the different installation needs. According to the panel dimension, the nozzles can have a diameter of 80mm or 125mm. The panel is made of galvanized steel sheet with RAL 9010 white finishing (other colours available upon request). The nozzles are made of aluminum with a rotating resistant gasket. The diffuser is available with CM installation counter frame, with side connection plenum (PLL) or upper connection plenum (PLS), with IEK connection element for mounting on circular ducts. The plenum can have a regulation damper and is available both with and without insulation. Quick selection Pressure drop Pa < 20 <70 Terminal velocity throw = 0.5 m/s at the room’s same temperature 22° angle, throw x 0.7 45° angle, throw x 0.5 Pressure drop Pa < 20 < 50

Multiple nozzles wall diffusers Technical draft Dimensions N° nozzles Dimensions N° nozzles IEK Element for connection to circular duct