Circular diffusers with adjustable cones SagiCofim Technical features CV 100 and DE 100 diffusers with adjustable cones are suitable for either ceiling and exposed ductwork installation, providing an adjustable air distribution, horizontally under cooling conditions and vertically under heating conditions. The correct air throw is simply obtained by adjusting the vertical position of the cones. The DE 100 type has a five-step adjustment system for the internal cones, while the CV 100 type has a screw adjustment system, in order to choose the most suitable position for operating conditions and the comfort of the people. Different types of Accessorieses are available: externally adjustable dampers (butterfly type or with multiple blades) and the distribution plenum with circular side connection, with or without insulation.

Circular diffusers with adjustable cones Technical draft Air flow direction adjustment Horizontal air supply Vertical air supply Duct connection Connection with DT 012 damper Connection with DT 003 damper 21

Circular diffusers with adjustable cones SagiCofim Accessories DT 012 damper Butterfly type, adjustable from the diffuser front side. Installation on the duct with side screws. DT 003 Damper Opposed multiple blades, screw adjusting system. DPS plenum Galvanized steel distribution plenum with circular side connection. Without damper. DPS-I plenum Galvanized steel distribution plenum with Class 1 internal polyethylene insulation (6 mm thick). Without damper. Square plate circular diffusers with adjustable cones Technical features