MONOBLOCK INDUSTRIAL ENCLOSURE IP66 · Compression molded boxes & cabinets made from fiberglass-reinforced polyester. Comes in color RAL 7035 Light Grey. · Self-extinguishing materials according to glow wire tests at 960º C, following UNE-EN-60695-2-10 Standards (IEC 60695-2-10). · Thermal Class Material according to EN-IEC-60085 Standards. IP-66 rated protection according to UNE EN 60529 Standards (IEC 60529). · IK-10 impact resistance according to EN 50102 Standards (IEC 62262). Its new door design features an increased impact resistance. · The door may be opened to 180º. It may be installed with a left or right sided opening orientation thanks to its reversible design. It features a double bar lock insert or, optionally, a triple-point, vandalism-resistant locking mechanism. Its lightweight properties allow an effortless installation. · Customization options for color, machining, installation accessories, locks, and laser printing for company logos. Polyester or metallic mounting plates may be attached as well. · Over 10 years of maintenance-free lifespan under standard environmental conditions. Code Height x Width x Depth Empty enclosure with transparent window colour light grey RAL

MONOBLOCK INDUSTRIAL ENCLOSURE IP66 Packaging 30 Units per pallet 120 x 80 cm (Height 210 cm) Maximum interior weight tolerance Max weight Environmental performance Minimum temperature IP water protection rating IEC-60529 Maximum temperature Electrical performance Installation & mounting system Nominal tension on direct current up to: Interior installation Wall mounting Nominal tension on alternating current up to:: Exterior installation Floor mounting Flush mounting Pole mounting Maximum power dissipation DT=40ºC (wall installation)