*mydirectindustry

BP

Product catalog summary

Overview
The document outlines the technical specifications and operational guidelines for the BP series of single-stage electric centrifugal pumps, designed for medium-to-low head applications with high flow rates.

Specifications

Capacities: Up to 220 m³/h
Heads: Up to 55 meters
Temperature of Pumped Liquid: -15°C to +70°C for BP 3-4-5-6, -15°C to +120°C for BP 7-8-9-13-14-15-16-17
Max Working Pressure: 6 bar for BP 3-4-5-6, 10 bar for BP 7-8-9-13-14-15-16-17
Max Ambient Temperature: 40°C
Motor Protection: IP 44 for BP 3-4-5-6-7, IP 55 for BP 9-10-11-12-13-14-15-16-17
Insulation Class: F
Standard Voltage: Single-phase 230V-50Hz, Three-phase 230/400V-50Hz up to 5.5HP, 400/690-50Hz over 5.5HP

Construction Features

Pump body and motor support are made of cast iron.
Impellers are made of cast iron or pressed brass, depending on the model.
Mechanical seals are made of graphite/ceramic.
Motors are totally enclosed with external ventilation and mounted on maintenance-free ball bearings.

Applications
These pumps are suitable for irrigation systems, water lifting from lakes, rivers, and tanks, and various industrial applications requiring high flow rates and medium-to-low heads.

Installation Guidelines

Pumps can be installed with the motor shaft either horizontally or vertically.
In vertical installations, the motor must be positioned above the pump body.

Performance and Standards

Hydraulic performance is in accordance with ISO 9906 annex A.
Motor specifications comply with CEI EN 60034-1.

Additional Notes

The suction pipe must be airtight and have specified minimum diameters to ensure performance.
Special versions and additional features, such as built-in thermal overload protection, are available upon request.

Catalog excerpts

ELETTROPOMPE CENTRIFUGHE MONOGIRANTI SINGLE STAGE ELECTRIC CENTRIFUGAL PUMPS ELECTROBOMBAS CENTRIFUGAS CON UNA TURBINA ELECTROPOMPES CENTRIFUGES MONOTURBINES EINSTUFIGE ELEKTRO-KREISELPUMPEN EECTROBOMBAS CENTRÍFUGAS DE UM IMPULSORL

Open the catalog to page 1

Open the catalog to page 3

PRINCIPIO DI FUNZIONAMENTO Questa serie di elettropompe centrifughe monogiranti è stata progettata per ottenere prevalenze medio basse e portate elevate in rapporto alle prevalenze. OPERATING PRINCIPLE This series of single-impeller electric pumps has been designed for medium-to-low heads and elevated capacities in relation to the heads. PRINCIPIO DE FUNCIONAMIENTO Esta serie de electrobombas centrífugas con una turbina se utiliza para obtener alturas de elevación medio/bajas y caudales altos en proporción a la altura de elevación. IMPIEGHI Queste elettropompe trovano impiego in impianti di irrigazione...

Open the catalog to page 4

ELETTROPOMPE ELETTROPOMPE CENTRIFUGHE MONOGIRANTI ELECTRIC SINGLE IMPELLER CENTRIFUGAL PUMPS ELECTROBOMBAS CENTRIFUGAS CON UNA TURBINA ELECTROPOMPES CENTRIFUGES MONOTURBINES EINSTUFIGE ELEKTRO-KREISELPUMPEN EECTROBOMBAS CENTRÍFUGAS DE UM IMPULSORL PRINCIPE DE FONCTIONNEMENT Cette série d’électropompes centrifuges monoturbines a été étudiée pour obtenir des hauteurs d’élévation moyennes-basses et des débits élevés par rapport aux hauteurs d’élévation. FUNKTIONSPRINZIP Diese Elektro-Kreiselpumpen mit einem Läufer wurden für niedrige bis mittlere Förderhöhen und hohe Förderleistungen im Vergleich...

Open the catalog to page 5

HYDRAULIC FEATURES - CARACTERISTICAS HIDRAULICAS - CARACTERISTIQUES HYDRAULIQUES HYDRAULISCHE EINGESCHAFTEN - CARACTER^STICAS HIDRAULICAS

Open the catalog to page 6

Le curve di prestazione sono basate su valori di viscosità cinematica = 1 mm2/s e densità pari a 1000 kg/m3. Tolleranza e curve secondo ISO 9906, appendice A. The performance curves are based on the kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906, attachment A. Las curvas de rendimiento se refieren a valores de viscosidad cinemática= 1 mm2/s y densidad de 1000 Kg/m3. Tolerancia de las curvas de acuerdo con ISO 9906, parrafo A. Les courbes de performances sont basées sur des valeurs de viscosité cinématique égale à 1 mm2/s et une densité...

Open the catalog to page 7

HYDRAULIC FEATURES - CARACTERISTICAS HIDRAULICAS - CARACTERISTIQUES HYDRAULIQUES HYDRAULISCHE EINGESCHAFTEN - CARACTER^STICAS HIDRAULICAS DIMENSIONS AND WEIGHTS - DIMENSIONES Y PESOS - DIMENSIONS ET POIDS ABMESSUNGEN UND GEWICHTE - DIMENSOES E PESOS

Open the catalog to page 8

HYDRAULIC FEATURES - CARACTERISTICAS HIDRAULICAS - CARACTERISTIQUES HYDRAULIQUES HYDRAULISCHE EINGESCHAFTEN - CARACTER^STICAS HIDRAULICAS

Open the catalog to page 10

BP9-10COSTANTI DI PROVA - CONSTANT TEST DATA - DATOS CONSTANTES DE ENSAYO - DONNEES CONSTANTES D'ESSAISKONSTANTE PRUFANGABEN - CONSTANTES DE ENSAIO n = 2900 1/min t = 15 °C p = 1000 Kg/m3 Le curve di prestazione sono basate su valori di viscosita cinematica = 1 mm2/s e densita pari a 1000 kg/m3. Tolleranza e curve secondo ISO 9906, appendice A. The performance curves are based on the kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906, attachment A. Las curvas de rendimiento se refieren a valores de viscosidad cinematica= 1 mm2/s y densidad...

Open the catalog to page 11

CARATTERISTICHE IDRAULICHE HYDRAULIC FEATURES - CARACTERISTICAS HIDRAULICAS - CARACTERISTIQUES HYDRAULIQUES HYDRAULISCHE EINGESCHAFTEN - CARACTER^STICAS HIDRAULICAS

Open the catalog to page 12

COSTANTI DI PROVA - CONSTANT TEST DATA - DATOS CONSTANTES DE ENSAYO - DONNEES CONSTANTES D’ESSAIS KONSTANTE PRÜFANGABEN - CONSTANTES DE ENSAIO n = 2900 1/min Limite per motori da / Limit for motors of / Limit pour moteurs de / Höchstleistung für Motoren von: kW 3 Le curve di prestazione sono basate su valori di viscosità cinematica = 1 mm2/s e densità pari a 1000 kg/m3. Tolleranza e curve secondo ISO 9906, appendice A. The performance curves are based on the kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906, attachment A. Las curvas de...

Open the catalog to page 13

CARATTERISTICHE IDRAULICHE HYDRAULIC FEATURES - CARACTERISTICAS HIDRAULICAS - CARACTERISTIQUES HYDRAULIQUES HYDRAULISCHE EINGESCHAFTEN - CARACTER^STICAS HIDRAULICAS DIMENSIONS AND WEIGHTS - DIMENSIONES Y PESOS - DIMENSIONS ET POIDS ABMESSUNGEN UND GEWICHTE - DIMENSOES E PESOS

Open the catalog to page 14

COSTANTI DI PROVA - CONSTANT TEST DATA - DATOS CONSTANTES DE ENSAYO - DONNEES CONSTANTES D’ESSAIS KONSTANTE PRÜFANGABEN - CONSTANTES DE ENSAIO n = 2900 1/min Le curve di prestazione sono basate su valori di viscosità cinematica = 1 mm2/s e densità pari a 1000 kg/m3. Tolleranza e curve secondo ISO 9906, appendice A. The performance curves are based on the kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906, attachment A. Las curvas de rendimiento se refieren a valores de viscosidad cinemática= 1 mm2/s y densidad de 1000 Kg/m3. Tolerancia...

Open the catalog to page 15

Open the catalog to page 16

COSTANTI DI PROVA - CONSTANT TEST DATA - DATOS CONSTANTES DE ENSAYO - DONNEES CONSTANTES D’ESSAIS KONSTANTE PRÜFANGABEN - CONSTANTES DE ENSAIO n = 2900 1/min Limite per motori da / Limit for motors of / Limit pour moteurs de / Höchstleistung für Motoren von: kW 22 Le curve di prestazione sono basate su valori di viscosità cinematica = 1 mm2/s e densità pari a 1000 kg/m3. Tolleranza e curve secondo ISO 9906, appendice A. The performance curves are based on the kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906, attachment A. Las curvas de...

Open the catalog to page 17