Compression Blow Forming 压塑吹瓶成型技术 Reduced plastic use, smaller footprint, greater sustainability and finished product excellence.

4 BLOWING AND COOLING 4 吹瓶与冷却 Compression Blow Forming The CBF method consists of a continuous extrusion 3 STRETCH AND PRE-BLOWING 3 拉伸与预吹成型 CBF的连续塑化挤出工艺，将原料切割为等重料 粒。料粒被投至开启模具中，通过压塑形成瓶坯。 outflowing material is cut into controlled-weight pellets. These are then inserted in open moulds 5 QUALITY CONTROL 5 质量控制 and compressed to make a preform. The exact preform shape may vary (especially as regards

PRODUCT / 产品 Number of cavities / 模腔数 Max body diameter (BD) / 瓶身最大直径 Max nominal height (H) / 最大高度 Max production capacity / 最大产能 Max neck diameter (T) / 瓶颈最大直径 Main technical data kWh/kg / 千瓦小时公斤 Machine size (LxWxH)* / 机器尺寸(长x宽x高)* H Machine weight (approx) / 机器预计重量 Installed power** / 装机

CONTAINER QUALITY Plasticizing unit operating continuously Leak test Highest process temperature stability Vision system Extremely precise pellet weight Metal detector • 塑化单元持续运行 • 料粒重量精确 • 泄漏测试 • 金属探测 SPECIFIC THROUGHPUT Highest output (production volume) per square metre LIGHTWEIGHTING • Up to 35% less weight with same barrier properties Weight reduction optimises mechancial perform

QUALITY, PERFORMANCE, SUSTAINABILITY AND PERFORMANCE, FEATURES THAT MAKE THE COMPRESSION BLOW FORMING SYSTEM UNIQUE IN COMPARISON WITH OTHER TECHNOLOGIES. TOTAL COST OF BOTTLE • Higher efficiency Lower start-up time Lighter bottle with improved mechanical Reduced labour requirements Less floor space Lowest power consumption in the industry Lower scrap rate during production Less material wastage during colour changes • 行业内能耗最低 • 产品光洁无毛边 No gate, no welding lines Zero resin scrap during production Improved sustainability and purity due to component. The design process uses innovative, sophisticated...

Inspection Systems INSPECTION OF THE TOP SE AL: • Incomplete seal • Flashes • Ovalized seal • Non-planar seal INSPECTION OF THE FINISH: • Black spots contamination 瓶口检测: • 黑点 – 污染 Design: BVS Vision System for CBF machines has been specifically designed to identify any flaws that may appear on the containers, especially INSPECTION OF THE BODY: • Blow forming flashes (located on the neck, due to handling) • Blow forming flashes • Thickness variation (scars) • Thickness variation (voids) • Black specks contamination • Convex bottom Compression Blow Forming technology. Quality container, from top...

SACMI reserves the right to introduce changes without notice / 30.09.2019 萨克米保留对以上内容做更改的权利 / 30.09.2