HANGARDOOR Large-sized door for hangar Sacil-Hlb Hangardoors are a special version of the traditional and tested sliding doors. They are exclusively produced on sixe according to the handling requirements and the construction room situation. The “skeleton” of the door is made of C and L steel proles that are dimensioned according to the height to be reached so that each project is customized and it never follows a standard solution. The number of leaves of the door can change accordingly to the space and “exibility” customer’s needs. The ground and roof parallel guides depend on the number of leaves. The lower trucks are put in the concrete before the installation by the customer and are “rail” type. The movement of the door if always with “dead man” control and each motorized leaf moves independently with a proper push-button. The additional safety devices are determined and veried accordingly to the customer’s needs.

Technical specications • In the global view it is possible to see the frame conguration. The sliding leaves let the “skeleton” at sight only inside and are then “lled” with insulated panels on the external side. The panel thickness can change and it is dened in the customized project. Inside the panels it is possible to put single or tape windows of various size. • It is also possible to feature the door with pass doors without threshold with emergency exit function. Automation • Each single leaf composing the door features an independent gearbox group • The gearbox is placed in a protected...