PG 3000 TRAIN Folding Door without floor track for train gates Exclusive Advantages Polystyrene insulation Giant Hinges 180° door opening Patented aluminium frame Adjustable aluminium frame Adjustable frame Upper aluminum frame Industrial folding door without oor truck with side pack made up of vertical panels, of various sizes, interconnected one to each other by means of hinges and sealed with safety epdm rubber seal guards. Suitable for medium and large rooms for train gates. It is produced with the exclusive patented “sliding hinge” system that allows adjustments of both the doors hinges and panels with door already installed. This solution reduces maintenance times and allows installation always “adjustable” over the time. The installation does not require a load bearing lintel because a high percentage of the weight is loaded on the side guides. Not having anu bottom truck this door requires preventive predispositions (slope, grids, etc) to prevent rainwater inltration.

Technical Specications • Operation Manual, prepared the next automatic drive when there are one or two panels on each side. • Panel total thickness of 52 mm with internal frame proled galvanized 20/10 double wrapped in galvanized steel painted with polyester resins, surface embossed thickness 7/10. • Union of the plates with the interior insulation and the frame obtained without the aid of mechanical and thermal welding system assembly but with hot by polyurethane glue, the total encapsulation of the plates to the inner frame allows to obtain the best results to the resistance to bending of the...