Chlusura Industrial! • attrazzatura par la madarna laglatlea

Insulated and Glazed Gate Doors A full and extensive range of gate doors that meets all types of technical and commercial requirements. Most of these doors are insulated, but there are also glazed and grid versions. The range includes accordion, folding, sliding, and swing gate doors. Each type is comprised of models and solutions ranging from standard to special and from small to very large sizes. The commercial acronyms that allow quick identification of the different product families are as follows: • PG folding insulated gate doors without floor track. • PG LUX glazed folding insulated gate...

General features of our doors All our doors are produced directly at our Cusano Milanino (Milan) facilities. The manufacturing process is organized like a real assembly line that starts with the uncoiling of sheet metal coils and ends with the final packaging. In addition to the unique characteristics of the production system, the doors themselves are designed to provide a series of benefits to customers who decide to purchase a Sacil Hlb product. Here are some examples: • gauged polystyrene insulation • 7/10” thick embossed sheet metal • cast aluminium hinges with Ø 25 mm pin and self-lubricating...

Standard embossed finish Smooth finished sheet metal also available on request and without any additional charge. Customers who choose this option should check with our Sales Office for available RAL colours. New! Insulated gate doors now available with the new wood colour finish on the outside. The standard version of all gate doors is made of a special galvanized, embossed and pre-painted sheet metal. Greater mechanical resistance and high impact and scratch resistance compared to smooth finish (optional).

Optional customized colours RAL 9002 RAL 9006 RAL 7016 RAL 3000 RAL 1021 RAL 5010 RAL 6005 RAL 8017 Other RAL colours available on request 2

Thermal transmittance in accordance with EN 10077 : 2003 and EN 10077-2 : 2005 • Complete gate door type 2+2 panel 52 mm. L x H 6000 x 6500 The door achieves thermal transmittance, calculated in accordance with EN 10077-2:2005 with calculation relation no. 103/08, equal to: Ud = 1.78 W/m°K . Thermal conductivity of the insulating panel alone equal to λd: 0.0813 W/m°K. • Single leaf 52 mm. L x H 1500 x 6500. The leaf achieves thermal transmittance, calculated in accordance with EN 10077-2:2003 equal to: Ud = 1,8 W / m°K Thermal conductivity of the insulating panel alone equal to λd: 0.0813 W/m°K....

for a high level of thermal insulation 1 Milled and gauged insulating material, before glue spreading. 2 Note the difference between “glued” panel A, just out of the press, and foamed panels B and C. The sheet metal is very hard to detach from panel A glued; the glue is evenly spread and covers the entire surface. From foamed panel B the sheet metal is easy to detach and most of the metal face is still visible and not bound to the insulating foam. 3 Automated spreading of the single component glue. Few manufacturers use this most advanced solution, as it is definitely more expensive than the...

As to the passage of air and light, nothing is impossible: the insulated gate doors made of sturdy polystyrene insulated panels can be processed and carved to allow the insertion of ventilation grids and windows according to a wide variety of aesthetic and functional needs. Thanks to the rigidity of the panels, the leaves can be transported with the grids and windows already pre-assembled during the manufacturing process! Our wide choice of standard grids and windows is listed below; special versions are available on request.

Ventilation grids with screens against rats or insects; galvanized finish, painted black or your choice of RAL colour. Standard sizes: L 700 - 800 mm x H 400 - 800 - 1600 mm

Rectangular portholes: EPDM rubber and 4+4 break resistant Visarm glass. Standard sizes: L 460 - 550 - 800 mm x H 700 - 900 - 1200 mm Rectangular portholes: aluminium and 4+4 break resistant Visarm glass (optional double wall glazing). Standard sizes: L 460 - 550 - 800 mm x H 700 - 900 - 1200 mm

EPDM rubber and 4+4 Visarm glass round portholes, often used for architectural reasons

PG PL PS PB US Pedestrian passage with step A courtesy pedestrian passage with step can always be built in a Sacil Hlb insulated gate door. Because of the step, these doors are not recommended as safety exits, but in some cases they can be accepted. The are best used as courtesy access to the building, to avoid opening the gate door. The width is the same as the panels that compose the gate door, less 20 cm for the perimeter frame. The standard supply includes handle and lock, AISI 304 stainless steel drip and kick plate, and black aluminium perimeter profiles. The door swings around security...

PG PL PS PB US Pedestrian passage with step Pedestrian passage with batten

Great attention to details 2 1 Aluminium security hinges that cannot be removed from the outside, with eccentric adjustment device, 2-4 black painted aluminium perimeter profile, and stainless steel drip and durable kick plate 3

Split panel Unlike sectional doors, folding doors can include a dedicated emergency exit door. This is to be considered as remedial solution for cases where an exit needs to be created in a building under renovation and/or upgrading, but the conditions of the walls do not allow the installation of safety exit doors elsewhere. A pedestrian passage without step is commonly called “split panel”, because the panel is spit into two sections so that the lower section can be opened toward the outside. The solution can be adopted in all door types consisting of 1, 2, or 4 panels per door if installed...

Split panel 2 1 Panic device with two locks (top and bottom), with or without outside handle and lock 2 Coupling device between the two split sections of the panel; the device can be adjusted using an Allen screw