- Catalogs
- Sacemi Gamar srl
- IMMERSION PUMPS
IMMERSION PUMPS
IMMERSION PUMPS
This document provides comprehensive specifications and guidelines for the use of immersion pumps, including both three-phase and single-phase models. These pumps are designed for transferring liquids with impurities up to 3 mm in size, commonly used in industrial applications such as machine tools, glass processing, and air-conditioning systems.
- IMM 80B Pumps: Equipped with brass impellers and aluminum bodies, suitable for liquids with viscosity not exceeding 21 cSt. They require specific installation conditions to prevent sludge intake.
- SPV Series (12-150): Made with PBT or Nylon hydraulic components, available in various sizes with specific flow rates and head capacities, used in machine tools and filtration systems.
- SP Series (12-150): Similar to SPV series but with cast iron bodies, designed for robust industrial applications.
- SPV 18 and MP 71A: Designed for single-phase power applications, maintaining similar performance to three-phase models.
Proper installation is crucial, including maintaining appropriate liquid levels and using compartment tanks for dirty liquids. Regular maintenance and genuine spare parts are recommended for optimal performance.
The pumps comply with UL standards, ensuring safety and reliability.
Detailed specifications include dimensions, weight, input power, voltage, current, rotational speed, and hydraulic performance. Tables provide size, weight, and performance data.
Pumps should be installed on tanks with capacities proportional to their flow rates, ensuring the maximum liquid level is 3-4 cm below the support flange. Compartment tanks are recommended for dirty liquids.
Materials used include nylon, steel, aluminum, cast iron, and bronze for various components like fan covers and impellers.
Hydraulic performance tables provide delivery head and volumetric delivery data, indicating efficiency and capacity under different conditions.
Consult the Technical Office for specific applications or significant impurities to ensure optimal performance and longevity.
Regular cleaning of the impeller and feed screw is required. Maintenance must be performed by qualified personnel with the machine disconnected from the mains.
Decommissioning should be done by competent personnel, complying with local waste disposal laws.
Details on pump types, components, allowed impurities, weight, and acoustic pressure levels are provided.
Common issues include engine not starting, no liquid flow, and insufficient pressure. Solutions involve checking connections and cleaning or replacing components.
Installers must provide motor overload and dry operation protection. Pumps are evaluated for water use only and are not suitable for swimming pool areas.
No part of this document may be reproduced without written consent from Sacemi-Gamar S.r.l. The manufacturer reserves the right to make product improvements without immediate manual updates.
Catalog excerpts
Immersion pumps c(UL>s Type IMM 80B LISTED They are suitable for transferring liquids containing impurities up to 3 mm in size. Their hydraulic components: impeller in brass, feed screw and pump body in aluminium allow them to be used with water, emulsions, with a viscosity not exceeding 21 cSt (3° Engel).. They are commonly used on: - machine tools (milling and turning machines) - glass processing machinery (TRI version) - surface treatment plants - filtration systems - air-conditioning systems They are normally installed on a tank with a capacity which is proportional to their flow rate, about...
Open the catalog to page 4
Spare parts nomenclature Materials
Open the catalog to page 5
They are suitable for transferring liquids containing impurities up to 3 mm in size. Their hydraulic components: impeller, feed screw and pump body in PBT allow them to be used with water, emulsions, with a viscosity not exceeding 21 cSt (3° Engel). They are commonly used on: - machine tools (milling and turning machines-drills) - glass processing machinery (TRI version) - printing machines They are normally installed on a tank with a capacity which is proportional to their flow rate, about 3-4 cm from the bottom. It is important to make sure that the maximum liquid level in the tank is always...
Open the catalog to page 6
Type SPV 12-18 Spare parts nomenclature SPV 12 *On demand. Ax. AISI 316 'Available only on suction pipe 220-270-350 *On demand. Ax. AISI 316 Available only on suction pipe 220-270-350
Open the catalog to page 7
Immersion pumps They are suitable for transferring liquids containing impurities up to 3 mm in size. Their hydraulic components: impeller, feed screw and pump body in PBT allow them to be used with water, emulsions with a viscosity not exceeding 21 cSt (3° Engel). They are commonly used on: - machine tools (milling and turning machines-drills) - glass processing machinery (TRI version) - printing machines - air-conditioning systems - filtration systems They are normally installed on a tank with a capacity which is proportional to their flow rate, about 3-4 cm from the bottom. It is important...
Open the catalog to page 8
**Available only on suction pipe 350 'Available only on suction pipe 350
Open the catalog to page 9
They are suitable for transferring liquids containing impurities up to 3 mm in size. Their hydraulic components: impeller, feed screw and pump body in Nylon allow them to be used with water, emulsions with a viscosity not exceeding 21 cSt (3° Engel). They are commonly used on: - machine tools (milling and turning machines) - glass processing machinery - printing machines - air-conditioning systems - spray booths They are normally installed on a tank with a capacity which is proportional to their flow rate, about 3-4 cm from the bottom. It is important to make sure that the maximum liquid level...
Open the catalog to page 10
ius Type SPV 100-150 They are suitable for transferring liquids containing impurities up to 3 mm in size. Their hydraulic components: impeller, feed screw and pump body in Nylon allow them to be used with water, emulsions with a viscosity not exceeding 21 cSt (3° Engel). They are commonly used on: - machine tools (milling and turning machines) - glass processing machinery (TRI version when possible) - printing machines - air-conditioning systems They are normally installed on a tank with a capacity which is proportional to their flow rate, about 4-5 cm from the bottom. It is important to make...
Open the catalog to page 12
Spare parts nomenclature
Open the catalog to page 13
They are suitable for transferring liquids containing impurities up to 3 mm in size. Their hydraulic components: impeller and feed screw in PBT, pump body in cast iron allow them to be used with water, emulsions with a viscosity not exceeding 21 cSt (3° Engel). They are commonly used on: - machine tools (milling and turning machines) - glass processing machinery (TRI version) - surface treatment plants - filtration systems They are normally installed on a tank with a capacity which is proportional to their flow rate, about 3-4 cm from the bottom. It is important to make sure that the maximum...
Open the catalog to page 14
Spare parts nomenclature ‘On demand AX AISI 416 ‘On demand AX AISI 416 ‘‘On demand cast iron G20 ‘‘On demand cast iron G20 ‘“Available only on suction pipe 350 ‘‘‘Available only on suction pipe 350
Open the catalog to page 15
Immersion pumps Uses They are suitable for transferring liquids containing impurities up to 3 mm in size. Their hydraulic components: impeller and feed screw in PBT, pump body in cast iron allow them to be used with water, emulsions with a viscosity not exceeding 21 cSt (3° Engel). They are commonly used on: - machine tools (milling and turning machines) - glass processing machinery (TRI version) - surface treatment plants - filtration systems They are normally installed on a tank with a capacity which is proportional to their flow rate, about 3-4 cm from the bottom. It is important to make sure...
Open the catalog to page 16
*On demand. Ax. AISI 416 **On demand Cast Iron G20 ***Available only on suction pipe 350 *On demand. Ax. AISI 416 **On demand Cast Iron G20 ***Available only on suction pipe 350
Open the catalog to page 17
They are suitable for transferring liquids containing impurities up to 3 mm in size. Their hydraulic components: impeller and feed screw in PTB, pump body in cast iron allow them to be used with water, emulsions with a viscosity not exceeding 21 cSt (3° Engel). They are commonly used on: - machine tools (milling and turning machines) - glass processing machinery (TRI version) - surface treatment plants - filtration systems They are normally installed on a tank with a capacity which is proportional to their flow rate, about 4-5 cm from the bottom. It is important to make sure that the maximum...
Open the catalog to page 18
Type SP 50-75 Spare parts nomenclature *On demand. Ax. AISI 416 **On demand Cast Iron G20 *On demand. Ax. AISI 416 **On demand Cast Iron G20
Open the catalog to page 19
They are suitable for transferring liquids containing impurities up to 3 mm in size. Their hydraulic components: impeller and feed screw in PTB, pump body in cast iron allow them to be used with water, emulsions with a viscosity not exceeding 21 cSt (3° Engel). They are commonly used on: - machine tools (milling and turning machines) - glass processing machinery (TRI version) - surface treatment plants - filtration systems They are normally installed on a tank with a capacity which is proportional to their flow rate, about 4-5 cm from the bottom. It is important to make sure that the maximum...
Open the catalog to page 20All Sacemi Gamar srl catalogs and technical brochures
COMPANY PROFILE22 Pages
CERTIFICATE OF COMPLIANCE1 Page
SUBMERSIBLE PUMPS2 Pages
MIXER1 Page
EXTERNAL VERTICAL MULTISTAGE PUMPS28 Pages
MULTI STAGE56 Pages
ELECTRIC PUMPS80 Pages
ELECTRIC MOTORS140 Pages
