■ ■■ saar Laaertechnik Carrier-Push-Back System

Technical description _ The Carrier-Push-Back system is an assembly of carriers that are joined together and moved on rails. The steel profiles forming the rails are inclined to ensure the pallets return to operator's side of the system. The carriers differ in height. The first pallet is placed on the highest carrier. When the next pallet is stored, those pallets already in the channel are pushed one space back. After that the next pallet to be stored is placed on the next lower carrier. The last pallet is placed directly on the steel rails. When the first pallet is removed the other pallets...

saar Carrier Push Back rails The rails used for the tracks is a closed box section that prevents dirt and damp getting in. The carriers are powder coated in light grey, RAL 7035, the rails are hot dip galvanized. This makes the Carrier-Push-Back system suitable for use in cold stores. Angled cross-brace Seventh carrier Track for sixth carrier Sixth carrier Fifth carrier Track for first carrier Fourth carrier Third carrier Second carrier First carrier Angled cross-brace System sketch of an 8 pallets deep channel The height of the structure depends on the number of pallets to be stored: 8 Pallets...

saar Racking specification The rack can be supplied in any frame depth up to 1300mm. Angle beams with a height of between 90mm and 120mm – depending on the structural calculation - must be fitted at the front and at the rear of the rack. Assembly of the system is very easy and quick: the pre-assembled rails for the Carrier-Push-Back system are bolted to the angle beams, the intermediate box beams only serve as support.

saar ? deep 2 to 8 pallets ? robust ? low construction height compact – ? dense storing compact – ? cannot get stuck safe – pallets ? move automatically by gravity safe – pallets ? only 2.5% necessary low slope – ? be stored crosswise pallets can ? from pallet quality independent ? rails galvanised – no abrasive wear ? can easily be modified for cpb drive-in racks Stable welded construction. Flanged wheels with ISO-bearings. One pair of rails for each carrier garantees a compact design The first pallet is positioned on the the heighest carrier. It is puhed back by the second pallet, which then...

saar Head Office Saar Lagertechnik GmbH Wiesenweg 2b D-65812 Bad Soden am Taunus Branch Office Germany West Dipl.-Ing. Gereon Fleck TechnologiePark / Friedrich-Ebert-Strasse D-51429 Bergisch-Gladbach Branch Office Great Britain Chris Adams phone +44 (0) 1604 470297 mobile +44 (0) 7528 167687 email [email protected] Branch Office Germany South and Austria Karl Huber Mildenbergstraße 2b/10 A-6900 Bregenz Branch Office Germany East Dieter Krailing Gewerbegebiet Zur Aue 1 D-99330 Crawinkel Central Warehouse Ulrich Ruf Gewerbegebiet Zur Aue 1 D-99330 Crawinkel