Centerless Grinding machines full series
4Pages

CNC控制器(選配) CNC controller (Option) NC控制器(選配) NC controller (Option) 研磨外徑(dia.) Grinding Range(dia.) 砂輪尺寸(dia.*W*H) Grinding wheel size(dia.*W*H) 調輪尺寸(dia.*W*H) Regulating wheel size(dia.*W*H) 　 　 砂輪轉速 Grinding wheel speed 調輪轉速 Regulating wheel speed (Gear) 伺服馬達 Regulating wheel speed (Servo) 　 　 砂輪馬達 Grinding wheel Motor 調輪馬達(齒輪) Regulating wheel Motor(Gear) 調輪伺服馬達(伺服) Regulating wheel Motor(Servo) 油壓泵浦馬達 Hydraulic Pump motor 水箱泵浦馬達 Coolant Pump motor 　 　 上滑板進給刻度 Upper slide feed graduation 上滑板最小進給刻度 Upper slide micro feed graduation 下滑板進給刻度 Lower slide feed graduation 下滑板最小進給刻度 Lower slide micro feed graduation 修整裝置進給刻度 Dressing device graduation 調輪傾斜角度 Regulating wheel tile angle 調輪旋轉角度 Regulating wheel swivel angle 　 　 機械尺寸 Machine Dimensions 機械重量 Machine Weight FANUC / MITSUBISHI (S系列 / Series) MITSUBISHI (S系列 / Series) mm

無心磨床 無心磨床(標準型) Centerless Grinder (Standard) 調輪驅動/R.W driven way: 變速箱 (Gear Type) 特色/Feature: 切削力好，停止研磨上展現其優越的切削性能 It is good for Infeeding due to the heavy power。 無心磨床(對話式NC) Centerless Grinder (Dialogue NC) 特色/Feature: 適合專用工件，對話式視窗方便操作人員使用，即 便沒用過電腦之人員按照步驟後也可以輕鬆使用。 Suitable for decided workpieces, S-TYPE will design the program to make your operator (who never used) controlled easily by following the procedures 無心磨床(可程式CNC) Centerless Grinder (CNC) 無心磨床(調輪伺服) Centerless Grinder (Servo Type) 特色/Feature: 可依照工件樣式進行程式修砂調整，來達到到所需 工件的樣式及精度/ The profile Grinding wheel could be dressed follows the...

Case Study 自動退料裝置 Auto Ejecting Device 特色/Feature: 快速退料 Fast Ejecting Workpiece 不易取出之工件 Good for the workpiece not easily to get off 上方壓料裝置 Holding workpiece from the upside 油壓自動進退刀PLC控制 PLC Hydraulic infeeding system 當工件前側較重時，輔助工件置於刀片上 Support the workpiece touch on the blade well when the workpiece head is heavy 特色/Feature: 研磨速度規律 Regular infeeding speed 節省人力 save engineer energy & mistake 特殊通磨用下料裝置 Special workpiece ejecting when Thrufeeding 特色/Feature: 當工件頭部或尾端為異型時 The workpiece head or bottom is not flat 保持圓度 keep the roundness good 工件特性 / Work piece Feature 1. 長度最長700mm 重心在前/ the...

Case Study Case Study 短工件磨兩邊一次兩隻 Short workpieces need grinding the both sides 三段一次進刀內完成 Three grinding parts are finished in one feeding 工件特性 / Work piece Feature 工件特性 / Work piece Feature 1. 約dia5mm兩端長度約4mm Both sides ground and the dia is 5mm, L:4mm 2. 兩端有同心度0.002mm內，尺寸控制0.004mm內 Concentricity is below 0.002mm and size should be controlled under 0.004mm 1. 有12 / 16 / 20 mm 三種尺寸需要在一次進刀內完成 The 12/16/20 grinding parts are finished In one infeeding 2. 同心度需要0.02mm (與其它製程比) The concentricity (the base is center hole) is 0.02mm 3. 三段同心在0.003mm內 The concentricity among three grinding parts are...