Messgeräte Sonstige Daten chlodi::lyser chlodi::lyser monitors chlorine dioxide (CLD) ∙ s::can plug & measure ∙ measuring principle: amperometric (membrane covered) ∙ ideal for all kinds of water treatment ∙ long term stable and lowest maintenance in operation 55,2 ∙ replacement of membrane only once a year ∙ readings stable even at high fluctuations of pH, temperature and flow ∙ strong surfactants are tolerated ∙ mounting and measurement in a flow cell ∙ factory precalibrated ∙ operation via s::can terminals & s::can software ∙ additionally also measures temperature recommended accessories part number article name D-330-xxx con::cube V3 D-320-xxx con::lyte C-1-010-sensor 1 m connection cable for s::can physical and ISE probes E-528-1/2-KIT Chlorine Dioxide electrolyte and membrane cap (spare parts) F-45-four flow cell for four s::can physical probes F-45-sensor flow cell for s::can sensor S-11-xx-moni moni::tool Software

technical specification measuring principle measuring principle detail amperometric potentiostatic 2-electrode system, membrane covered resolution 0.001 mg/l for 0 - 2 mg/l 0.01 mg/l for 0 - 20 mg/l automatic compensation instrument temperature response time (T90) 1 min. integration via con::cube con::lyte con::nect power supply 9 ... 30 VDC power consumption (typical) 0.5 W power consumption (max.) 0.6 W interface to s::can terminals sys plug (IP67), RS485 housing material weight (min.) dimensions (Ø x l) operating temperature operating pressure installation / mounting process connection recomended...