Descriptive Bulletin 1024-30
4Pages

Add to favorites

{{requestButtons}}

Catalog excerpts

S&C IntelliCap® 2000 Automatic Capacitor Controls

Open the catalog to page 1

S&C IntelliCap® 2000 Automatic Capacitor Controls: Intelligent Two-Way Communicating Controls for Smart Grid Applications IntelliCap 2000 Automatic Capacitor Controls are specifically designed to control pole-mounted and pad-mounted switched capacitor banks in electric distribution systems, to regulate reactive power or line voltage. These reliable, easy-to-use, microprocessor-based controls normally operate autonomously, based on the control strategy selected. With a one-way communication device installed, an IntelliCap 2000 Control can also operate in response to switching commands from...

Open the catalog to page 2

IntelliCap 2000 Controls accept a single-phase voltage signal from a voltage transformer, which is also used to derive control power. With the optional voltage sensing input feature, sensing and power can be derived from separate sources. Models with VAR and current control strategies additionally accept a single-phase current signal from an S&C CS Line Post Current Sensor or a current transformer. The neutral input sensing feature, when specified, accepts a signal from a voltage transformer, S&C Outdoor Voltage Sensor, Lindsey Voltage Sensor, or current sensor. Communication equipment...

Open the catalog to page 3

Specifications Electrical Operating Characteristics • Selectable Nominal Operating Voltage: 110, 115, 120, 127, 220, 230, or 240 Vac, 50 or 60 Hz Electrical Isolation/Protection • Insulation Withstand: 2.5 kV RMS • Surge Withstand: ANSI/IEEE C37.90.1, EN/IEC 61000-4-4 and -4-5 2004, and ANSI C62.41 Section 5.3.1 Categories C1 and C3 • ESD Protection: IEEE C37.90.3-2001 and IEC 61000-4-2:2008 • Radiated Emissions: FCC Part 15B, EN 55022B • Radiated Susceptibility: IEC 61000-4-3:2008 10 V/m and IEEE C37.90.2-2004 35 V/m Fuses • Control and Communication Device Fuse: Time-delayed GMD 2A, 250...

Open the catalog to page 4

All S&C Electric Company catalogs and technical brochures

1. 

   SERIES 2000 CIRCUIT-SWITCHER

   22 Pages

2. 

   S&C 5800 Series Automatic Switch Controls With IntelliTEAM II? Automatic Restoration System

   10 Pages

3. 

   IntelliTEAM SG ? Automatic Restoration System

   12 Pages

4. 

   IntelliNode Interface Module

   4 Pages

5. 

   S&C?s IntelliTEAM II ? Automatic Restoration System

   4 Pages

6. 

   S&C's Products and Services Information Bulletin

   104 Pages

7. 

   Fault Tamer Fuse Limiter: For Outdoor Distribution

   8 Pages

8. 

   Power Fuses - Types SM-4 and SM-5

   19 Pages

9. 

   Power Fuses - Type SMD-20

   2 Pages

10. 

    Power Fuses -- Type SMD-1A

    20 Pages

11. 

    Smart Grid SMS Storage Management System

    4 Pages

12. 

    Smart Grid CES™ Community Energy Storage

    4 Pages

13. 

    Cypoxy Insulators

    4 Pages

14. 

    Switch Operators - Type PM

    4 Pages

15. 

    Source-Transfer PMH Pad-Mounted Gear

    20 Pages

16. 

    Vista Underground Distribution Switchgear

    16 Pages

17. 

    Scada-Mate CX Switching System Outdoor Distribution

    4 Pages

18. 

    Micro-AT Source-Transfer Controls

    6 Pages

19. 

    M Series Switch Operators

    4 Pages

20. 

    Scada-Mate Switching Systems

    29 Pages

21. 

    IntelliLINK® Remote Setup Software

    4 Pages

22. 

    IntelliCAP PLUS Automatic Capacitor Controls

    4 Pages

23. 

    IntelliRupter PulseCloser

    20 Pages

24. 

    SpeedNet Radios

    4 Pages

25. 

    Automatic Switch Control For Outdoor Pole-Mounted Gear v

    8 Pages