Industriesauger DAV-SB

Product catalog summary

Overview: The DAV-SB series industrial vacuum cleaners by RUWAC Industriesauger GmbH are designed for use on production lines to vacuum lint and cutting waste such as paper, plastic, and fabric. These vacuum cleaners are tailored to meet the specific requirements of production machines.

Specifications:

Models: DAV-SB 2.2 and DAV-SB 3.0
Motor Power: 2.2 kW and 3.0 kW
Voltage: 400 V
Continuous Vacuum: 210 mbar (DAV-SB 2.2), 240 mbar (DAV-SB 3.0)
Short Term Vacuum: 325 mbar (DAV-SB 2.2), 335 mbar (DAV-SB 3.0)
Air Flow Rate: 285 m3/h (DAV-SB 2.2), 355 m3/h (DAV-SB 3.0)
Capacity: 150 litres
Filter: Dust class M, 1.0 m2
Dimensions: 600 mm x 600 mm x 1300 mm
Sound Pressure Level: 68 dB(A) (DAV-SB 2.2), 69 dB(A) (DAV-SB 3.0)
Protection Class: IP 65
Fill Level Monitoring: Visual
Connector Diameter: 70 mm

Procedures:

Collect cutting waste in a fleece sack.
Monitor the fill level through the viewing panel.
Change the filter easily by lifting off the cover for easy disposal.

Standards and Compliance:

Complies with DIN EN 60335-2-69, Annex CC.
ATEX 94/9/EC compliant.

Catalog excerpts

Industrial Vacuum Cleaners DAV-SB

Open the catalog to page 1

The industrial vacuum cleaners in the DAV-SB series are used on production lines to vacuum both lint and cutting waste (e.g. paper, plastic, fabric). The suction power, construction and dimensions are adapted for the requirements of the production machines with which they are used. Cutting waste is vacuumed and collected in a filter sack designed for dust class M. In this way, the collected material compacts well, so the full potential volume of the filter can be used. When it is full, the filter can be easily removed from the vacuum. RUWAC Industriesauger GmbH Web: www.ruwac.de E-Mail: [email protected]...

Open the catalog to page 2

All Ruwac Industriesauger GmbH catalogs and technical brochures

Archived catalogs

Three-Phase Vacuum Cleaners Type DS1
4 Pages