entstauber typ ds6
8Pages

{{requestButtons}}

Catalog excerpts

entstauber typ ds6 - 1

Dust Extractor type DS 6: Dust explosion protected design I

Open the catalog to page 1
entstauber typ ds6 - 2

Drive unit with long-life centrifugal blower Sheet steel housing, modular system Bag filter, low filter surface load Manual deduster Intake module Simple emptying procedure for the dust collection bin

Open the catalog to page 2
entstauber typ ds6 - 3

Drive unit with long-life centrifugal blower Residual dust filter for dust class H Automatic compressed air dedusting Intake module Sheet steel housing, modular system Cartridge filter, low filter surface load Simple emptying procedure for the dust collection bin

Open the catalog to page 3
entstauber typ ds6 - 4

Residual dust filter 36 m2

Open the catalog to page 4
entstauber typ ds6 - 5

Noise suppressor Intake modules 2 x 200 mm Ø (not illustrated) Spark trap for spraying sparks Extinguisher device for flammability ratings A, B, C or D Disposal Container 50 litre

Open the catalog to page 5
entstauber typ ds6 - 6

Fire detection / fire fighting Spark trap for spraying sparks The spark trap consists of a separate housing incorporating a labyrinth insert of special sheet metal. The configuration of the labyrinth ensures multiple changes of direction for the air, thereby cooling the sparks. Fire extinguisher The detection hose is installed in the fire hazard area. It is pressurised and is connected to the fire extinguisher container. In the event of fire the hose adjacent to the seat of the fire becomes heated and at a temperature of approx. 100°C it bursts. The resulting loss of pressure opens the...

Open the catalog to page 6
entstauber typ ds6 - 7

Dust extractors in dust explosion hazard areas (zone 22) pursue a single goal: to ensure a dust-free and safe production process free of disruption. Our systems are ideal for extracting airborne dust DIRECTLY at source, or from the production machine. Their wide range of performance features makes them suitable for almost all applications, as portable units or as central vacuum systems. All dust extractors are fitted with large dust class M filters (optionally also dust class H). They guarantee consistent suction power and a long service life. DS 63000 in sintered metal technology

Open the catalog to page 7
entstauber typ ds6 - 8

Housing Voltage (V) Motor power (kW) Vacuum (mbar) Protection class / optional (IP) Sound pressure level (dB(A)) (DIN 45635-01-KL 3) Bag filter, dust class M (m2) Residual dust filter for dust class H (m2) Air flow rate (m3/h) (for 3 m hose, 200 mm 0) Air throughput (m3/h) ( measured at the fan) Capacity (l) Dedusting method Suction connection (mm) Housing height (mm) (dust class M 10 / 20 m2) Housing height (mm) (dust class H 10 / 20 m2) Length x width (mm) DS 63000 Cartridge filter for dust class M (m2) - Residual dust filter for dust class H (m2) - Air flow rate (m3/h) (for 3 m...

Open the catalog to page 8

All Ruwac Industriesauger GmbH catalogs and technical brochures

  1. Silo/Cyclone

    2 Pages

  2. Accessory

    28 Pages

  3. Tipper

    2 Pages

  4. Brochure en

    2 Pages

  5. Brochure en

    2 Pages

  6. Brochure en

    4 Pages

  7. Brochure en

    4 Pages

  8. Brochure en

    2 Pages