
The RUNPOTEC cable lubricant GEL significantly reduces frictional resistance, facilitating the pulling of cables and wires into electrical installation pipes while protecting them from damage. It is applied directly to the cable or inside the pipe and is effective with cable pushing systems. To prevent staining, sensitive surfaces should be covered or excess lubricant removed with a damp cloth.
Seal after use and store in a cool, dry place. Avoid contact with live parts to prevent short circuits. Contains 2 methyl-2H-isothiazole-3-one, which may cause allergic reactions. Staining is possible on sensitive surfaces. Refer to the safety data sheet for instructions.
RUNPOTEC GmbH | Irlachstraße 31 | A-5303 Thalgau | Tel.: +43-6235-20335 | Fax: +43-6235-20335-35 | [email protected] | www.runpotec.com
The images are representative. Changes and printing errors excepted - Revision: February 2022
DATA SHEET CABLE LUBRICANT GEL GEL 250 g / 1000 g Item no.: 30467 / 30064 Application images: Click here Productinformation Click here Productinformation Carton order 9 Not flammable! 9 No sticking, colourless and odourless Dissolves without residue 9 Great price/performance ratio 9 Excellent sliding and lubricating effect Operational area: RUNPOTEC cable lubricant GEL reduces the frictional resistance enormously, thus making it easier to pull cables and wires into electrical installation pipes and protecting them from cable damage. More cable lubricating compound: Spray Item no.: 20523 Application: Apply RUNPOTEC cable lubricant GEL to the cable or on the inside of the pipe. Also highly effective for the pushing in with cable pushing systems.To prevent staining, we recommend covering sensitive surfaces or removing excess lubricant directly with a damp cloth. Click here Productinformation FOAM Item no.: 20522 Click here Productinformation Product features: Non-flammable, reduces frictional resistance, temperature resistant up to 85 °C, improved sliding effect, silicone-free, water-soluble, non-corrosive, no sticking, skin-friendly, biodegradable. Dissolves without residue. Caution: Seal after use, store in a cool and dry place. Contact with live parts must be avoided Risk of short circuit! EUH208: Contains 2 methyl-2H-isothiazole-3-one. Can cause allergic reactions. Staining possible on sensitive surfaces. For instructions see safety data sheet! Scope of delivery: 1 piece cable lubricant gel RUNPOTEC GmbH | Irlachstraße 31 | A-5303 Thalgau | Tel.: +43-6235-20335 | Fax: +43-6235-20335-35 | [email protected] | www.runpotec.com The images are representative. Changes and printing errors excepted - Revision: February 2022
Open the catalog to page 11 Page
2 Pages
1 Page
4 Pages
2 Pages
2 Pages
1 Page
2 Pages
64 Pages
1 Page
1 Page
1 Page
1 Page