Covers
19Pages

Covers in steelpage 2 Characteristics > . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3CPTA 1 - Half circle with straight side > . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4CPTA 2 - Half circle without straight side > . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5CPTA - With Inspection Door > . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6CPTA 4 - Walkway...

Material: -galvanised steel for constructionaccording to EURONORM EN 10 147 of1996-class S 220 GD + Z 1.0241 - Z35 Standard covering: Z 350 hotgalvanisation on both sides 12.5 εm eachside.-Other materials on request: ALZ: aluzinc AZ 185 AL: aluminium I04: stainless steel AISI 304 I16: stainless steel AISI 316 Z45: Z=450 hot galvanisation, 16.0 each sideZ60: Z=600 hot galvanisation, 21.5 յeach side Covering options according to theenvironmental conditions and the conveyed materials: Other types of covering : PPE:Pre-Painting on galvanised steel Z 225 polyester 25 m PVD:PVDF 35 յmpolyvinyl...

-Standard thickness: 75/100-For intermediate covers thickness variesaccording to the radius. Lay-out with intermediate module at 180and covers at 135а(allowing a better view of the belt) Standard lay-outStandard lay-out (with alternate covers 180- 135а) Standard moduleIntermediate module USEFUL LENGTH 1064 USEFUL LENGTH 304 1102 342 > 20 mm 76 mm > 20 mm 76 mm pitch 1064 mm pitch 1064 mm 3041064 > 45 opening 4 Internal radius r

inspection door with handles3 hinges > Internal radius r

1 Covers seriesCPTA in steel > Overlapping CPTA 4WalkwayӔ Internal radius r Straight side H Internal height = H + r Dimensions on request: When you send us your enquiry, pleasesupply the following details: - opening 2 R - straight side H - lay-out for ground positioning - lay-out for suspendedӔ positioning (inthis case please specify the framework section)- environmental conditions and wind max.force Covers are supplied in 2 pieces.Standard pitch. NOTE: The fixing brackets for sheet steelcovers (on the ground or fixed to the framework) are not part of our supply but we can suggest to you...

Standard length. Details to be specified:Inflection (F) Chord (C) Possible fixing accessories for covers type 6(not part of our supply). > Please contact Rulmeca for furtherinformation and details These covers can be opened on both sides. > 8 size="-1">

RemovablepartHandleOverlapping 200mm Fixed partHandle Internal radius r The best solution for ergonomics andsafety .Improved ergonomics for belt & idler inspection.The removable part, equipped with 2handles, is easily disassembled (the fixingis done with 2 straps). More safety in comparison with othersystems equipped with hinges, in order to avoid any risk to the operators.Easy assembly Possible lock-up For a better visibility of the idlers sets wesuggest the following lay-out: 1 cover - width 304 mm. alternated to 1 removable cover - width 1064 mm. > 9 size="-1">

Ventilated covers reduce andeliminate condensation. The fixing components ar > Ventilated covers are specifically meantfor hot environments and conditions inwhich hot material is handled .This system grants a good air circulationunder the cover, thus decreasing the belt temperature and its hardness, so making its life longer.These covers reduce the powdersuspension in the air and the possible risks of explosion.They are an excellent solution againstcorrosion problems in case of close and Dimensions for the opening window w.415 x h. 540 mm or on request. The cover opening is made through a...

+34 93 729 09 59 Web: www.rulmeca. Spain comE-mail: espana@rulmeca.com Russia RULMECA ESPAA S.L.C.I. Santiga, C/ Puig dels Tudons, 5 E-08210 BarberѠ del Valls (Barcelona) - Spain Phone: +34 93 729 96 52 Fax: RULMECA FAA GmbHBro Moskau : Leninski Prospekt 95 A 119313 Moskau - Russia Tel: +7 095 937 5243 Fax: +7 095 132 3774 E-mail: faamsk@com2com.ru > Italy RULLI RULMECA S.P.A.Via A. Toscanini, 1 I-24011 Alme輒 (Bergamo) - Italy Phone: +39 035 4300111 Fax: +39 035 545523 Web: www.rulmeca.it E-mail: rulmeca@rulmeca.it Portugal Great Britain RULMECA INTERROLL DE PORTUGALApartado 69 Centro...

1ed. BU EN 01/05 Ю RULLIRULMECA S.p.A. Via A.Toscanini,1 - 24011 Alm (Bergamo) ItalyTel.+39 035 4300111 Fax +39 035 545700 E-mail:rulmeca@rulmeca.it www.rulmeca.com >