Rule-Mate™ Series fully automated bilge pumps The Rule Mate series of Bilge pumps feature a solid state water sensing technology that eliminates the need for a separate float switch. When water enters the bilge and reaches a certain height (2-3/4 inches) a sensor turns the pump on. After the water is pumped out, another sensor shuts the pump off. The sensor’s unique “field effect” technology will only recognize water. If a 100% concentration of oil is detected the pump will not activate. This is not a zero discharge prevention system. The result is the most technically advanced bilge pump available in the marketplace. Rule Mate II series are available in 500, 750 and 1100. Rule has been building bilge pumps for 30 years. The pumps are preferred by yachtsmen and commercial fishermen the world over. Features and Benefits • All-in-one pump & switch - No float switch required • Snap-off strainer for easy cleaning • Pump turns on when water level rises & shuts off when water is removed • Anti-Fouling Impeller • Limited three year warranty

Rule-Mate Series FULLY AUTOMATED BILGE PUMPS Each Pump Includes Rule-Mate Automated Bilge Pump (1) Straight Hose Barb Fitting (1) 90º Angled Hose Barb Fitting Electromechanical Rule Mate I series are available in 1500 & 2000 Bilge Pump Accessories Available from Rule Deluxe Smooth Bore PVC Ribbed Bilge Hose Clear ribbed bilge hose. Smooth inside finish improves pump performance by 30%. Rigid helix provides excellent abrasion resistance. Available in 3/4" (19mm), 1-1/8" (29mm), 1-1/2" (38mm) I.D. hose in 100’ (31m) lengths. 3-way Panel Lighted Rocker Switch Controls all Rule-Mate models. The unit...