Catalog excerpts
Oil Change & Diesel Transfer Pumps 07 Oil Change Pumps Diesel Transfer Pumps
Open the catalog to page 207 Oil Change & Diesel Transfer Pumps selection guide Oil Change Pumps Fitting Size (height x depth) Hose- ½'' (13mm) ID x 48'' (12mm) long. Probe - ¼'' (6.5mm) OD x 40'' (100cm) long. Size (height x depth x width) Connections for 3/8” NPT male threaded fitting Size (height x depth x width) DIY Oil Changer .12 volt 8' dipstick probe. DC, fuse included. Flat Tank Oil Changer. 8' dipstick probe & 7' power leads. 12 volt DC, fuse 5 amp. Size (height x depth x width) Flow Self Priming gpm (lpm) 12 volt DC, fuse 10A Junior Gear Puppy. Call for more information. 24 volt DC, fuse 5A, Junior Gear...
Open the catalog to page 3101 Sliding Vane 18680 6 gpm Reversible Size (length x width x height) 115 volt AC model, 1/8hp, 60Hz TENV, 3450 rpm (Non CE). 12 volt DC model, fitted switch, fuse 20 amp. 24 volt DC model, fitted switch, fuse 10 amp. Connections for 1” 24 volt DC, fuse 10 amp, fitted (25mm) ID hose, or switch. ¾” BSP. 24 volt DC, fitted with 20 amp switch and circuit breaker. Temperature Range Slimline Pumps 12 Volt dc model, fitted with reversing switch. Size (length x width x height) Temperature Range Size Weight Flow (length x width x height) Temperature Range Size Weight (length x width x height)...
Open the catalog to page 407 Oil Change & Diesel Transfer Pumps Oil Change Pumps The Porta-Quick™ Portable Oil Changer makes quick, clean and easy oil changes onboard any boat, because it uses the vessel’s own power supply to operate the powerful oil reservoir mounted flexible impeller pump. • 14 Quart (13 litre) container easily handles two engines. • Pump is reversible to both drain and refill engine oil. • Sturdy bronze pump head. • High temperature resistant Teflon™ dip-stick probe. • Non-collapsible thick wall suction hose. • Garden hose thread adapter included, for dipsticks with GHT male threaded ends. •...
Open the catalog to page 5DIY Oil Changer The Do-it-Yourself Oil Changer is simple to use, and offers quick and easy oil changes for the leisure boat owner. • Fully assembled. • 14 Quart (13 litre) container. • Tested for 1400 cycles. • 8’ (2.49m) dipstick hose. size WEIGHT The Oil Change Pump is the same high quality pump used in the Jabsco multi-engine Oil Change System. The powerful pump can change oil in a typical V-8 engine in just minutes. • Pump is reversible to both drain and refill engine oil. • Self-priming to 3ft (1m) of lift. • Includes 3/8” NPT full flow ball valve. • Reversing switch guard to avoid...
Open the catalog to page 607 Oil Change & Diesel Transfer Pumps Oil Change Pumps Gear Puppies These robust pumps make oil and diesel transfer simple and easy for fixed installation systems. The Junior Gear Puppy can produce 3.5 gpm (14 lpm) and the Gear Puppy can produce up to 6.5 gpm (25 lpm) and handle viscosities up to 150cs. • Rugged bronze construction. • Inlet filter supplied. 23220-2012 12 volt DC, fuse 10A, Junior Gear Puppy. • Complies with USCG 183.410 and ISO 8846 MARINE (ignition protection). 24 volt DC, fuse 5A, Junior Gear Puppy. • 15 minute duty rating. 12 volt DC, fuse 15A, Gear Puppy. 24 volt DC,...
Open the catalog to page 7Engine Oil Drain Pump fitting • Screws onto threaded male ¾” garden hose Connection for ¾” GHT male thread. Polished brass hand pump connects directly to engine oil dipstick tube on many popular marine engines such as OMC and Mercruiser. • (GHT) fitting on top of dipstick tube. • Gives simple “one-hand” pumping. Engine Oil Drain Pump. • Complete with 2ft (60cm) of ½” (13mm) ID drain hose. Handy Boy Utility Pump fitting Connection for ½” (13mm) ID hose. Foot adaptor for ½” (13mm) ID hose. 1 each ½” (13mm) ID hoses, 1 each 5/16” (6.5mm) probe, 1 each ¼” (6mm) probe. Versatile polished brass...
Open the catalog to page 807 Oil Change & Diesel Transfer Pumps Diesel Transfer Pumps Sliding Vane 18680 - 6 gpm Light duty, 30 minute rated diesel pump. • 6 gpm (23 lpm) at 10ft (3m) head. • 30ft (9m) maximum total head. • Self-priming up to 3ft (1m) vertical lift. • Duty cycle-30 minutes at 10ft (3m) at 86°F (30°C). • Rugged bronze pump head. • Complies with USCG 183.410 and ISO 8846 • MARINE (Ignition Protection). For service and spare parts listing see page 247. Sliding Vane 18680 - 6 gpm Reversible Light duty, 30 minute rated diesel pump with integral reversing switch. • 20ft (6m) maximum total head. •...
Open the catalog to page 9Sliding Vane 23870 Light duty, 35 minute rated diesel pump. • 20ft (6m) maximum total head. 7” long x 5½” wide x 4½” high (19cm x 11cm x 14cm). • Self-priming up to 9ft (2.8m) vertical lift. 12 volt DC model, fitted switch, fuse 20 amp. • Integral switch and fuse fitted as standard. 24 volt DC model, fitted switch, fuse 10 amp. • Accessories available. • ISO 8846 MARINE (Ignition Protection). For service and spare parts listing see page 247. Sliding Vane VR050 Continuously rated, diesel pump. 8½” long x 5” wide x 5¼” high (23cm x 13cm x 15cm). • 13.7 gpm (50 lpm) at 10ft (3m) total head. •...
Open the catalog to page 10All RULE INDUSTRIES catalogs and technical brochures
-
Marine Product Catalog
7 Pages
-
General Purpose Pumps
8 Pages
-
Livewell/Baitwell Pumps
6 Pages
-
02 Bilge Pumping Systems
24 Pages
-
Ventilation Blowers
4 Pages
-
ECO-Switch
16 Pages
-
SuperSwitch? Float Switch
2 Pages
-
Rule-A-Matic® Float Switch
2 Pages
-
Rule 1800 GPH
2 Pages
-
RB280-100 Promotional Sheet
2 Pages
-
EV8000
2 Pages
-
AQ500-100 Promotional Sheet
2 Pages
-
General Purpose Pumps
14 Pages
-
Livewell/Baitwell Pumps
10 Pages