Vibration Control System RL-C21M
20Pages

Vibration Control System RL-C21M

Vibration Control System

Vibration Control System RL-C21M is a top-of-the-line vibration control system for electrodynamic shakers. A direct successor to RL-C21M, it features improved technical and metrological characteristics and expanded testing capabilities. The device has multichannel scalable architecture and constructively comes in two modifications — with four or eight input channels in one unit. RL-C21M can be scaled up to 64 input and 16 output channels. — Control by strain gauge and force sensors Powered by our advanced vibration testing software, RL-C21M supports the widest range of vibration tests and...

Vibration Control System RL-C21M RL-C21M Controller Parameters General Features

Vibration Control System RL-C21M RL-C21M comes in two solutions with a different number of input and output channels to suit the user's needs. Flexible channel configuration covers the most common vibration testing requirements and provides the ability to build multichannel vibration sets.

Vibration Control System RL-C21M RL-C21M Vibration Control System RL-C21M vibration control system provides outstanding accuracy of control, reliability and high safety standard. Vibration control systems produced by RULA Technologies are used with a specialized software package for running vibration tests - TestUP. The software supports all types of vibration tests: Sine, Random, Shock, SRoR, SRS, TTH, FDR, etc. Furthermore, the software enables running and controlling multishaker tests. Pre-Start Check The RL-C21M system runs a pre-start check of the vibration system by providing sine...

Vibration Control System Comprehensive Graphs The graphic subsystem of TestUP is built around a convenient contextual menu with a number of quality-of-life features: autoscale option, unlimited number of user cursors, additional grid lines, textual notes and ability to display several graphs in one window. Report Creation TestUP software automatically produces ready-to-use, detailed reports at the end of a testing procedure. The user can select the information to be included in the report. Autonomous Mode The RL-C21M system can run tests without a PC or laptop connected. The tests to be run...

Vibration Control System Sine Test Sweep Rate Sine tests with fixed or swept frequency provides highly accurate multichannel control in real time. Resonance Search and Tracking option helps to determine FRF peaks of the object under test. Swept frequency Fixed frequency Resonance search and tracking dwell The user can specify linear (Hz/s, min/sweep, cycles) or logarithmic (Oct/min, min/sweep, dec/min, cycles) sweep rate for each profile segment. Resonance Search and Tracking RL-C21M determines resonance frequencies automatically. After resonance search is done, the system can continue...

Vibration Control System Advanced Sine Test This test type allows using up to independent 8 sine tones simultaneously. Each sine tone has its own individual schedule. Besides, you can divide the frequency range of the profile into segments to have a sine tone run on each of them. Such a procedure helps to considerably decrease test time. Advanced Sine Test Features • Number of sine tones to run simultaneously: 1 – 8. Sine tone amplitude can be set in the units of acceleration, velocity and displacement. Each sine tone is controlled independently to get the best possible accuracy. Sweep rate...

Vibration Control System Random Test Constant Number of Degrees of Freedom (CDOF) In case of random vibration the object under test is subject to true random signal with specified PSD, and either Gaussian or non-Gaussian amplitude statistics. Kurtosis RL-C21M supports tests with non-Gaussian random signals. Kurtosis control allows increasing the probability of peak acceleration values. Specifying the value of Kurtosis approximates the impact on the device under test to the actual operating conditions. The option of using constant number of degrees of freedom (CDOF) makes it possible to...

Vibration Control System RL-C21M SRoR Tests RL-C21M controller enables running the following types of tests: • Sine on Random. • Random on Random. • Sine and Random on Random. • Sine on Sine. SRoR Test Features • Number of superimposed sine tones: 1 to 12. • Number of superimposed random bands: 1 to 12. • For each superimposed sine tone or random band the user can specify sweep rate, start and end frequency and amplitudes. • Sine tone amplitude can be set in the units of acceleration, velocity and displacement. • Kurtosis settings. • Spectrum averaging with Constant Number of Degrees of...

Vibration Control System RL-C21M Vibration Control System RL-C21M Shock Test RL-C21M supports all the classical pulse types. Shock Test Features • Displacement requirements optimization • Test modes: — «Automatic» - shocks are run with the preset interval. Interval duration is not limited — «Manual» - shocks are run by user command • Pulse types: triangle, trapeze, rectangle, initial peak saw-tooth and terminal peak saw-tooth, full sine, half sine, haversine Pulse Schedule | SRS table | SRS | Pulse type I | Check for shaker limits @ Check pulse "on the fly" Acceleration 1.0000 g (peak)G2%)...

Vibration Control System RL-C21M Shock Response Spectrum Test (SRS Shock) SRS test provides the possibility to control SRS of the device under test to match the required one. RL-C21M supports all the classical types of wavelets. SRS Test Features • Pulse duration: up to 10 s • Types of wavelets: — WAVSYN Vibration Control System RL-C21M — ZERD — Damped sine wave — Burst Random — Linear and Exponential Chirp and etc. • Frequency range: DC to 80000 Hz. • Test modes: — «Automatic» -shocks are run with the preset interval. The interval duration is not limited. — «Manual» - shocks are run only...