THREAD REPAIR TOOLS Thread inserts 182 ProCoil thread repair assortment 183 ProCoil thread repair sets 184 Accessories: Twist drill DIN 338 type N HSS-G + single-cut tap HSS for ProCoil 185

Standard design, stainless steel and free running. Thread reinforcement for materials with low shearing strenght, e.g. aluminium alloys and magnesium alloys as well as to repair enables worn and damaged threads. Packaging: plastic Nominal thread size Fitting-tools Nominal thread size

ProCoil thread repair assortment Picture shows ProCoil thread repair kit 86-piece (244 208). See table for other versions. twist drills HSS Ø 5.2 | 6.2 | 8.3 | 10.3 | 12.4 mm 5 single-cut taps DIN 352 HSS - M 5 | M 6 | M 8 | M 10 | M 12 5 fitting tools M 5 | M 6 | M 8 | M 10 | M 12 5 pin-breakers Ø 3.5 - 4.6 - 6.0 - 7.5 - 9.0 mm 60 inserts M 5 - M 10 - each 5 x Ø 1.0 / 1.5 / 2.0: Height = 1.0 x Ø 6 inserts M 12 - each 2 x Ø 1.0 / 1.5 / 2.0: Height = 1.0 x Ø Assortment M 6 - M 14 for spark plug threads twist drills HSS Ø 6.2 | 8.3 | 10.3 | 12.4 | 14.5 mm 5 single-cut taps DIN 352 HSS - M 6 | M...

ProCoil thread repair sets Picture shows 19-piece thread repair kit (244 206). See table for other versions. 1 twist drill Ø 3.1 mm + 1 single-cut tap DIN 352 HSS for thread M 3 x 0.5 + 1 fitting tool M 3 + 1 pin-Breaker Ø 2.0 mm + each 5 inserts Height = 1.0 x Ø / Height = 1.5 x Ø / Height = 2.0 x Ø 1 twist drill Ø 4.1 mm + 1 single-cut tap DIN 352 HSS for thread M 4 x 0.7 + 1 fitting tool M 4 + 1 pin-Breaker Ø 2.7 mm + each 5 inserts Height = 1.0 x Ø / Height = 1.5 x Ø / Height = 2.0 x Ø 1 twist drill Ø 5.2 mm + 1 single-cut tap DIN 352 HSS for thread M 5 x 0.8 + 1 fitting tool M 5 + 1 pin-Breaker...

n. Twist drill DIN 338 type N HSS-G High-performance, ground twist drill made from high-speed steel. The fully ground twist drill has increased concentricity. Areas of application: for steel, alloyed and unalloyed cast steel (up to 900 N/mm2 strength), grey cast iron, malleable cast iron, ductile cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze. Packaging: plastic tube The single-cut tap HSS for through threads in unalloyed and low-alloyed steels up to a strength of 800 N/mm2, malleable cast iron and non-ferrous metals. The...