Type and applications overview 128 - 129 Hand tap M DIN 352 HSS - left-hand thread 132 Round die M DIN EN 22568 HSS - left-hand thread 132 Hand tap sets HSS + HSSE-Co 5 139 Hand tap and twist drill sets HSSE-Co 5 139 Hand tap and twist drill sets HSS 140 Thread-cutting sets in industrial cassette HSS + HSSE-Co 5 141 Single-cut tap + ULTIMATECUT twist drill type FLOWSTEP® set HSS 142 Sanitary repair thread-cutting set HSS for cylindrical pipe thread 145 Thread-cutting tool sets in wooden case HSS 145 Tap wrench with ratchet 147

Main application Other application Cast iron High strength steel Structural steel

The hand tap consists of high speed steel (HSS). For through threads and bottoming threads in unalloyed and low-alloyed steels. malleable cast iron and non-ferrous metals. The thread is cut in three operation. Item no. 230 Item no. 230 Item no. 230 Also available individually Taper tap: 6 - 8-thread chamfer Second tap: 4 - 5-thread chamfer Final tap: 2 - 3-thread chamfer Packaging: plastic Set consists of 1x taper tap, 1x second tap and 1x final tap

Round die M DIN EN 22568 The round die consists of high speed steel in unalloyed and low-alloyed steels up to a strength of 800 N/mm2. The round die consists of 5 % cobalt alloyed high speed steel (HSSE-Co 5) in unalloyed and alloyed steels up to a strength of 1000 N/mirP and non-ferrous metals. The thread is cut in one operation. Packaging: plastic

Hand tap M DIN 352 - left-hand thread Also available individually Flanks: relief-ground Packaging: plastic Set consists of 1x taper tap, 1x second tap and 1x final tap Nominal thread size M Round die M DIN EN 22568 - left-hand thread Thread: metric, DIN ISO 13 Packaging: plastic Nominal thread size M

Hand tap MF DIN 2181 Also available individually Taper tap: 5 - 6-thread chamfer Item no. 235 -1 Thread: metric fine, DIN ISO 13 Flanks: relief-ground Packaging: plastic Set consists of lx taper tap and lx final tap Application tip After two rotations of the drill turn back 1/3 rotation to break the chip. Thus the strain on the screw tap decreases. Lubrication with RUKO cutting oil is recommended.

Round die MF DIN EN 22568 Thread: metric fine, DIN ISO 13 Packaging: plastic It is recommended that the threading dies are turned back briefly now and then so that the chips break and do not clog the threads. Lubrication with RUKO cutting oil is recommended.

Hand tap G DIN 5157 Also available individually Thread: DIN ISO 228 "G" (cylindrical pipe thread) DIN 2999 "Rp" (Whitworth pipe thread) Flanks: relief-ground Packaging: plastic Set consists of 1x taper tap and 1x final tap Round die G DIN EN 24231 Nominal thread size G Thread: DIN ISO 228 "G" (cylindrical pipe thread) Packaging: plastic

Hand tap BSW » DIN 352 Also available individually Taper tap: 5 - 6-thread chamfer Item no. 246 -1 Final tap: 2 - 3-thread chamfer Item no. 246 -3 Flanks: relief-ground Packaging: plastic Set consists of lx taper tap, 1x second tap and lx final tap

Also available individually Taper tap: 5 - 6-thread chamfer Second tap: 4 - 5-thread chamfer Final tap: 2 - 3-thread chamfer Thread: American UNC coarse thread Flanks: relief-ground Packaging: plastic Set consists of lx taper tap, 1x second tap and lx final tap

Hand tap UNF « DIN 2181 Also available individually Thread: American UNF coarse thread Flanks: relief-ground Packaging: plastic Set consists of lx taper tap and lx final tap

Hand tap sets HSS and HSSE-Co 5 HSSE-Co 5 HSS 21 Hand tap set M DIN 352 one three-piece set each of M 3 | M 4 | M 5 | M 6 | M 8 | M 10 | M 12 in plastic case one three-piece set each of M 3 | M 4 | M 5 | M 6 | M 8 | M 10 | M 12 1 tap wrench DIN 1814 size 11/2 in steel case Hand tap and twist drill sets HSSE-Co 5 29 Hand tap and twist drill set in steel case one three-piece set each of M 3 | M 4 | M 5 | M 6 | M 8 | M 10 | M 12 7 twist drills DIN 338 type VA 0 2.5 | 3.3 | 4.2 | 5.0 | 6.8 | 8.5 | 10.2 mm 1 tap wrench DIN 1814 size 11/2 Hand tap and twist drill set in plastic case one three-piece...

Hand tap and twist drill sets CAST IRON Hand taps M DIN 352 one three-piece set each of M 3 | M 4 | M 5 | M 6 | M 8 | M 10 | M 12 7 twist drills DIN 338 type N Ø 2.5 | 3.3 | 4.2 | 5.0 | 6.8 | 8.5 | 10.2 mm 1 tap wrench DIN 1814 size 11/2 Hand tap and twist drill set in plastic case Hand taps M DIN 352 one three-piece set each of M 3 | M 4 | M 5 | M 6 | M 8 | M 10 | M 12 7 twist drills DIN 338 type N Ø 2.5 | 3.3 | 4.2 | 5.0 | 6.8 | 8.5 | 10.2 mm Hand tap and twist drill set in tool magazine Hand taps M DIN 352 one three-piece set each of M 3 | M 4 | M 5 | M 6 | M 8 | M 10 | M 12 7 twist drills...

Thread-cutting sets CAST IRON CAST IRON DIY thread-cutting toolsset one three-piece set each of hand taps M DIN 352 M 3 | M 4 | M 5 | M 6 | M 8 | M 10 | M 12 + 7 dies Ø 25.0 mm ≈ DIN EN 22568 M 3 | M 4 | M 5 | M 6 | M 8 | M 10 | M 12 + 1 die stock DIN 225 - 25.0 x 9.0 mm + 1 tap wrench, size 1½ DIN 1814 + 1 screwdriver Thread-cutting tool set one three-piece set each of hand taps M DIN 352 M 3 | M 4 | M 5 | M 6 | M 8 | M 10 | M 12 + 7 dies M DIN EN 22568 M 3 | M 4 | M 5 | M 6 | M 8 | M 10 | M 12 + 5 die stocks DIN 225 20.0 x 5.0 | 20.0 x 7.0 | 25.0 x 9.0 | 30.0 x 11.0 | 38.0 x 14.0 mm + 2 tap...

Single-cut tap M « DIN 352 The single-cut tap HSS for through threads in unalloyed and low-alloyed steels up to a strength of 800 N/mm! The single-cut tap HSSE-Co 5 for through threads in unalloyed and alloyed steels up to a strength of 1000 N/mm2, malleable cast iron and non-ferrous metals. The thread can be cut in one operation by hand or machine. Thread: metric, DIN ISO 13 Flanks: relief-ground Packaging: plastic Set consists of 1x Taper tap, 1x Second tap and 1x Final tap Nominal thread size M Single-cut tap +ULTIMATECUT twist drill type FLOWSTEP® set HSS 7 single-cut taps « DIN 352 HSS,...

Single-cut tap NPT For through threads in unalloyed or low-alloyed steels up to 800 N/mm2 strength, malleable cast iron and non-ferrous metals. The thread can be cut in one operation by hand or machine. Note: pilot drill cylindrical^ Thread: American conical pipe thread to ANSI B.1.20.1 Flanks: relief-ground Packaging: plastic Hexagonal die nut M DIN 382 Nominal thread size NPT Thread: metric, DIN ISO 13 Packaging: plastic